Utah Admin. Code 307-342-4
The following additional definitions apply to R307-342:
"Acrylonitrile-butadiene-styrene (ABS) welding adhesive" means any adhesive intended by the manufacturer to weld acrylonitrile-butadiene-styrene pipe, which is made by reacting monomers of acrylonitrile, butadiene and styrene.
"Adhesive" means any chemical substance that is applied for the purpose of bonding two surfaces together other than by mechanical means.
"Adhesive primer" means any product intended by the manufacturer for application to a substrate, prior to the application of an adhesive, to provide a bonding surface.
"Aerospace component" means a fabricated part, assembled part, or completed unit, including passenger safety equipment, of any aircraft, helicopter, missile or space vehicle.
"Architectural sealant or primer" means any sealant or sealant primer intended by the manufacturer to be applied to stationary structures, including mobile homes and their appurtenances. Appurtenances to an architectural structure include, but are not limited to: hand railings, cabinets, bathroom and kitchen fixtures, fences, rain gutters and downspouts, and windows.
"Automotive glass adhesive primer" means an adhesive primer labeled by the manufacturer to be applied to automotive glass prior to installation of the glass using an adhesive or sealant.
"Ceramic tile installation adhesive" means any adhesive intended by the manufacturer for use in the installation of ceramic tiles.
"Chlorinated polyvinyl chloride plastic (CPVC) plastic" means a polymer of the vinyl chloride monomer that contains 67% chlorine and is typically identified with a CPVC marking.
"Chlorinated polyvinyl chloride (CPVC) welding adhesive" means an adhesive labeled for welding of chlorinated polyvinyl chloride plastic.
"Cleanup solvent" means a VOC-containing material used either to remove a loosely held uncured (i.e., not dry to the touch) adhesive or sealant from a substrate or to clean equipment used in applying a material.
"Computer diskette jacket manufacturing adhesive" means any adhesive intended by the manufacturer to glue the fold-over flaps to the body of a vinyl computer diskette jacket.
"Contact bond adhesive" means an adhesive that:
(1) is designed for application to both surfaces to be bonded together;
(2) is allowed to dry before the two surfaces are placed in contact with each other;
(3) forms an immediate bond that is impossible, or difficult, to reposition after both adhesive- coated surfaces are placed in contact with each other; and
(4) does not need sustained pressure or clamping of surfaces after the adhesive-coated surfaces have been brought together using sufficient momentary pressure to establish full contact between both surfaces.
"Contact adhesive" means an adhesive that feels dry to the touch and bonds instantly. Contact adhesives do not include rubber cements that are primarily intended for use on paper substrates and vulcanizing fluids that are designed and labeled for tire repair only.
"Cove base" means a flooring trim unit, generally made of vinyl or rubber, having a concave radius on one edge and a convex radius on the opposite edge that is used in forming a junction between the bottom wall course and the floor or to form an inside corner.
"Cove base installation adhesive" means any adhesive intended by the manufacturer to be used for the installation of cove base or wall base on a wall or vertical surface at floor level.
"Cyanoacrylate adhesive" means any adhesive with a cyanoacrylate content of at least 95% by weight.
"Department of Defense military technical data" means a specification that specifies design requirements, such as materials to be used, how a requirement is to be achieved, or how an item is to be fabricated or constructed.
"Enclosed cleaning system" means a cleaner consisting of a closed container with a door or top that can be opened and closed and fitted with cleaning connections. A spray gun is attached to the enclosed cleaning system by a connection, and solvent is pumped through the gun to clean it. The cleaning solvent falls back into the cleaning system's solvent reservoir for recirculation.
"Flexible vinyl" means non-rigid polyvinyl chloride plastic with at least 5% by weight plasticizer content.
"Fiberglass" means a material consisting of extremely fine glass fibers.
"Indoor floor covering installation adhesive" means any adhesive intended by the manufacturer for use in the installation of wood flooring, carpet, resilient tile, vinyl tile, vinyl backed carpet, resilient sheet and roll or artificial grass. Adhesives used to install ceramic tile and perimeter bonded sheet flooring with vinyl backing onto a non- porous substrate, such as flexible vinyl, are excluded from this category.
"Laminate" means a product made by bonding together two or more layers of material.
"Marine deck sealant" or "marine deck sealant primer" means any sealant or sealant primer labeled for application to wooden marine decks.
"Medical equipment manufacturing" means the manufacture of medical devices, such as, but not limited to, catheters, heart valves, blood cardioplegia machines, tracheostomy tubes, blood oxygenators, and cardiatory reservoirs.
"Metal to urethane/rubber molding or casting adhesive" means any adhesive intended by the manufacturer to bond metal to high density or elastomeric urethane or molded rubber materials, in heater molding or casting processes, to fabricate products such as rollers for computer printers or other paper handling equipment.
"Multipurpose construction adhesive" means any adhesive intended by the manufacturer for use in the installation or repair of various construction materials, including but not limited to drywall, subfloor, panel, fiberglass reinforced plastic (FRP), ceiling tile and acoustical tile.
"Nonmembrane roof installation/repair adhesive" means any adhesive intended by the manufacturer for use in the installation or repair of nonmembrane roofs and that is not intended for the installation of prefabricated single-ply flexible roofing membrane, including, but not limited to, plastic or asphalt roof cement, asphalt roof coating and cold application cement.
"Outdoor floor covering installation adhesive" means any adhesive intended by the manufacturer for use in the installation of floor covering that is not in an enclosure and that is exposed to ambient weather conditions during normal use.
"Panel installation" means the installation of plywood, pre-decorated hardboard (or tileboard), fiberglass reinforced plastic, and similar pre-decorated or non-decorated panels to studs or solid surfaces using an adhesive formulated for that purpose.
"Perimeter bonded sheet flooring installation" means the installation of sheet flooring with vinyl backing onto a nonporous substrate using an adhesive designed to be applied only to a strip of up to four inches wide around the perimeter of the sheet flooring.
"Plastic cement welding adhesive" means any adhesive intended by the manufacturer for use to dissolve the surface of plastic to form a bond between mating surfaces.
"Plastic cement welding adhesive primer" means any primer intended by the manufacturer for use to prepare plastic substrates prior to bonding or welding.
"Plasticizer" means a material such as a high boiling point organic solvent that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, as determined by ASTM Method E-260-96.
"Polyvinyl chloride (PVC) plastic" means a polymer of the chlorinated vinyl monomer that contains 57% chlorine.
"Polyvinyl chloride welding adhesive" or "PVC welding adhesive" means any adhesive intended by the manufacturer for use in the welding of PVC plastic pipe.
"Porous material" means a substance that has tiny openings, often microscopic, in which fluids may be absorbed or discharged, including, but not limited to, wood, paper and corrugated paperboard.
"Roadway sealant" means any sealant intended by the manufacturer for application to public streets, highways and other surfaces, including but not limited to curbs, berms, driveways and parking lots.
"Rubber" means any natural or manmade rubber substrate, including styrene-butadiene rubber, polychloroprene (neoprene), butyl rubber, nitrile rubber, chlorosulfonated polyethylene and ethylene propylene diene terpolymer.
"Sealant primer" means any product intended by the manufacturer for application to a substrate, prior to the application of a sealant, to enhance the bonding surface.
"Sealant" means any material with adhesive properties, including sealant primers and caulks, that is formulated primarily to fill, seal, waterproof or weatherproof gaps or joints between two surfaces. "Sheet-applied rubber installation" means the process of applying sheet rubber liners by hand to metal or plastic substrates to protect the underlying substrate from corrosion or abrasion. These operations also include laminating sheet rubber to fabric by hand.
"Single-ply roof membrane" means a prefabricated single sheet of rubber, normally ethylene- propylenediene terpolymer, that is field applied to a building roof using one layer of membrane material.
"Single-ply roof membrane installation and repair adhesive" means any adhesive labeled for use in the installation or repair of single-ply roof membrane.
(1) Installation includes, as a minimum, attaching the edge of the membrane to the edge of the roof and applying flashings to vents, pipes and ducts that protrude through the membrane.
(2) Repair includes gluing the edges of torn membrane together, attaching a patch over a hole and reapplying flashings to vents, pipes or ducts installed through the membrane.
"Single-ply roof membrane adhesive primer" means any primer labeled for use to clean and promote adhesion of the single-ply roof membrane seams or splices prior to bonding.
"Single-ply roof membrane sealant" means any sealant labeled for application to single-ply roof membrane.
"Structural glazing adhesive" means any adhesive intended by the manufacturer to apply glass, ceramic, metal, stone or composite panels to exterior building frames.
"Subfloor installation" means the installation of subflooring material over floor joists, including the construction of any load bearing joists. Subflooring is covered by a finish surface material.
"Surface preparation solvent" means a solvent used to remove dirt, oil and other contaminants from a substrate prior to the application of a primer, adhesive or sealant.
"Thin metal laminating adhesive" means any adhesive intended by the manufacturer for use in bonding multiple layers of metal to metal or metal to plastic in the production of electronic or magnetic components in which the thickness of the bond line is less than 0.25 mils.
"Tire repair" means a process that includes expanding a hole, tear, fissure or blemish in a tire casing by grinding or gouging, applying adhesive, and filling the hole or crevice with rubber.
"Traffic marking tape" means preformed reflective film intended by the manufacturer for application to public streets, highways and other surfaces, including curbs, berms, driveways and parking lots.
"Traffic marking tape adhesive primer" means any primer intended by the manufacturer for application to surfaces prior to installation of traffic marking tape.
"Undersea-based weapons systems components" means the fabrication of parts, assembly of parts or completed units of any portion of a missile launching system used on undersea ships.
"Waterproof resorcinol glue" means a two-part resorcinol-resin-based adhesive designed for applications where the bond line must be resistant to conditions of continuous immersion in fresh or salt water.
Utah Admin. Code R307-342-4