Section R70-910-7 - Requirements for National Type Evaluation(1) The department incorporates by reference the Uniform Regulation for National Type Evaluation as adopted by the NCWM and published in the National Institute of Standards and Technology Handbook 130, "Uniform Laws and Regulations."(2) Section R70-910-7, shall apply to any type of device and equipment listed in the National Institute of Standards and Technology (NIST) Handbook 44 which the department incorporates by reference and the evaluation procedures that have been published in the 2024 version of the National Conference on Weights and Measures (NCWM), Publication 14, "National Type Evaluation Program, Technical Policy, Checklists, and Test Procedures".(3)(a) The department shall require a device to be traceable to an active Certificate of Conformance (CC) before its installation or use for commercial or law enforcement purposes.(b) If the device consists of separate and compatible main elements, each main element shall be traceable to a CC.(c)(i) A device is traceable to a CC if: (ii) it is of the same type identified on the Certificate; and(iii) it was manufactured during the period that the Certificate was maintained in active status.(4) The department may: (a) operate a Participating Laboratory as part of the NTEP, and shall charge and collect fees for type evaluation services; and(b) cooperate with and enter into agreements with any person to carry out the purposes of this rule.Utah Admin. Code R70-910-7
Amended by Utah State Bulletin Number 2021-13, effective 6/28/2021Adopted by Utah State Bulletin Number 2024-16, effective 8/12/2024