Section R66-31-5 - Potency Testing and Standards(1) A batch of cannabinoid product shall have the following determined and listed on the COA: (a) quantity of any cannabinoid it is known to contain, including any THC analog; and(b) the cannabinoid profile by percentage of mass.(2) Cannabinoid products may not exceed the cannabinoid product THC level.(3) A lot or batch of cannabis plant product, cannabis concentrate, or cannabis product fail quality assurance testing for cannabinoid content if:(a) any of the artificially derived cannabinoids listed in Table 1 are found to be present; or(b) greater than 10% of the total cannabinoid peak area is comprised of unknown cannabinoids after peaks smaller than 1% of the total peak area have been excluded as determined by high-performance liquid chromatography with a diode array detector (HPLC-DAD). TABLE 1 Artificially Derived Cannabinoids |
Analyte | Chemical Abstract Service (CAS) Registry number |
Hexahydrocannabinol (HHC) | 36403-90-4, 36403-91-5 |
3-Heptyl-delta(1)-tetrahydrocannabinol (THCP) | 54763-99-4, 51768-60-6 |
tetrahydrocannabinol acetate (THC-OAc) | 23132-17-4, 23050-54-6 |
Utah Admin. Code R66-31-5
Adopted by Utah State Bulletin Number 2024-10, effective 5/13/2024Amended by Utah State Bulletin Number 2024-22, effective 10/30/2024