Section 330.63 - [Effective until 11/17/2024] Contents of Part III of the Application(a) Site development plan. This plan must include criteria that in the selection and design of a facility will provide for the safeguarding of the health, welfare, and physical property of the people and the environment through consideration of geology, soil conditions, drainage, land use, zoning, adequacy of access roads and highways, and other considerations as the specific facility dictates. The site development plan must include the items listed in this section.(b) General facility design. (1) Facility access. The owner or operator shall describe how access will be controlled for the facility such as the type and location of fences or other suitable means of access control to prevent the entry of livestock, to protect the public from exposure to potential health and safety hazards, and to discourage unauthorized entry or uncontrolled disposal of solid waste or hazardous materials.(2) Waste movement. The owner or operator shall submit a generalized process design and working plan of the overall facility that includes, at a minimum:(A) flow diagrams indicating the storage, processing, and disposal sequences for the various types of wastes and feedstocks received;(B) schematic view drawings showing the various phases of collection, separation, processing, and disposal as applicable for the types of wastes and feedstocks received at the facility;(C) proposed ventilation and odor control measures for each storage, separation, processing, and disposal unit;(D) generalized construction details of all storage and processing units and ancillary equipment (i.e., tanks, foundations, sumps, etc.) with regard to approximate dimensions and capacities, construction materials, vents, covers, enclosures, protective coatings of surfaces, etc. Performance data on all units shall be provided;(E) generalized construction details of slab and subsurface supports of all storage and processing components;(F) locations and engineering design details of all containment dikes or walls (with indicated freeboard) proposed to enclose all storage and processing components and all loading and unloading areas;(G) plans for the storage of grease, oil, and sludge on site including determinations of maximum periods of time all separated materials will remain on site and the ultimate disposition of such materials off site;(H) proposed disposition of effluent resulting from all processing operations; and(I) for transfer stations, provide designs for noise pollution control.(3) Sanitation. The owner or operator shall describe how solid waste processing facilities will be designed to facilitate proper cleaning. This may be accomplished by: (A) controlling surface drainage in the vicinity of the facility to prevent surface water runoff onto, into, and off the treatment area;(B) constructing walls and floors in operating areas of masonry, concrete, or other hard-surfaced materials that can be hosed down and scrubbed;(C) providing necessary connections and equipment to permit thorough cleaning with water or steam; and(D) providing adequate floor or sump drains to remove wash water.(4) Water pollution control. The owner or operator shall describe how all liquids resulting from the operation of solid waste processing facilities will be disposed of in a manner that will not cause surface water or groundwater pollution. The owner or operator shall provide for the treatment of wastewaters resulting from the process or from cleaning and washing and specify how the procedure for wastewater disposal is in compliance with the rules of the commission.(5) Endangered species protection. If necessary, the owner or operator shall describe how the facility will be designed to protect endangered species.(c) Facility surface water drainage report. The owner or operator of a municipal solid waste (MSW) facility shall include a statement that the facility design complies with the requirements of § 330.303 of this title (relating to Surface Water Drainage for Municipal Solid Waste Facilities). Additionally, applications for landfill and compost units shall include a surface water drainage report to satisfy the requirements of Subchapter G of this chapter (relating to Surface Water Drainage) and shall include the following. (1) Drainage analyses. The owner or operator shall submit the following information and analyses: (A) drawing(s) showing the drainage areas and drainage calculations;(B) designs of all drainage facilities within the facility area, including such features as typical cross-sectional areas, ditch grades, flow rates, water surface elevation, velocities, and flowline elevations along the entire length of the ditch;(C) sample calculations provided to verify that existing drainage patterns will not be adversely altered;(D) a description of the hydrologic method and calculations used to estimate peak flow rates and runoff volumes including justification of necessary assumptions: (i) the 25-year rainfall intensity used for facility design including the source of the data; all other data and necessary input parameters used in conjunction with the selected hydrologic method and their sources should be documented and described;(ii) hydraulic calculations and designs for sizing the necessary collection, drainage, and/or detention facilities;(iii) discussion and analyses to demonstrate that existing drainage patterns will not be adversely altered as a result of the proposed landfill development; and(iv) structural designs of the collection, drainage, and/or storage facilities.(2) Flood control and analyses. The owner or operator shall:(A) identify whether the site is located within a 100-year floodplain. If applicable, indicate 100-year floodplain on the drawing in paragraph (1)(A) of this subsection;(B) provide the source of all data for such determination and include a copy of the relevant Federal Emergency Management Agency (FEMA) flood map or the calculations and maps used where a FEMA map is not used. FEMA maps are prima facie evidence of floodplain locations. Information shall also be provided identifying the 100-year flood level and any other special flooding factors (e. g., wave action) that must be considered in designing, constructing, operating, or maintaining the proposed facility to withstand washout from a 100-year flood. The boundaries of the proposed landfill facility should be shown on the floodplain map;(C) if the site is located within the 100-year floodplain, provide information detailing the specific flooding levels and other events (e.g., design hurricane projected by Corps of Engineers) that impact the flood protection of the facility. Data should be that required by §§ 301.33- 301.36 of this title (relating to Preliminary Plans: Data To Be Submitted, Criteria For Approval of Preliminary Plans; Additional Information; Plans To Bear Seal of Engineer). The owner or operator shall include cross-sections or elevations of landfill levees shown tied into contours;(D) for construction in a floodplain, submit, where applicable: (i) approval from the governmental entity with jurisdiction under Texas Water Code, § 16.236, as implemented by Chapter 301 of this title (relating to Levee Improvement Districts, District Plans of Reclamation, and Levees and Other Improvements);(ii) a floodplain development permit from the city, county, or other agency with jurisdiction over the proposed improvements;(iii) a Conditional Letter of Map Amendment from FEMA; and(iv) a Corps of Engineers Section 404 Specification of Disposal Sites for Dredged or Fill Material permit for construction of all necessary improvements.(d) Waste management unit design. (1) Storage and transfer units. The owner or operator shall: (A) describe how the solid waste management facility will be designed for the rapid processing and minimum detention of solid waste at the facility. The owner or operator shall specify that all solid waste capable of creating public health hazards or nuisances be stored indoors only and processed or transferred promptly and shall not be allowed to result in nuisances or public health hazards. If the facility is in continuous operation, such as for resource or energy recovery, the owner or operator shall provide design features for wastes storage units that will prevent the creation of nuisances or public health hazards due to odors, fly breeding, or harborage of other vectors;(B) design the units to control and contain spills and contaminated water from leaving the facility. The design shall be sufficient to control and contain a worst-case spill or release from the unit. Unenclosed containment areas shall also account for precipitation from a 25-year, 24-hour rainfall event; and(C) specify the maximum allowable period of time that unprocessed and processed wastes are to remain on site.(2) Incineration units. The owner or operator shall provide waste feed rates, an estimate of the amount and planned method for testing and final disposal of incinerator ash, an estimate of the volume of quench or process water, and the planned method of treatment and disposal of such water.(3) Surface impoundments. The owner or operator shall provide: (A) design specifications for surface impoundments, including a plan view and cross-section of the impoundment;(B) the minimum freeboard to be maintained and the basis of the design to prevent overtopping resulting from normal or abnormal operations; overfilling; wind and wave action; rainfall; run-on (if allowed); malfunctions of level controllers, alarms, and other equipment; and human error. The owner or operator shall show that adequate freeboard will be available to prevent overtopping from a 25-year, 24-hour rainfall event; and/or(C) in accordance with § 330.339 of this title (relating to Liner Quality Control Plan), a liner quality control plan prepared in accordance with Subchapter H of this chapter (relating to Liner System Design and Operation).(4) Landfill units. The owner or operator shall specify: (A) provisions for all-weather operation, e.g., all-weather road, wet-weather pit, alternative disposal facility, etc., and provisions for all-weather access from publicly owned routes to the disposal facility and from the entrance of the facility to unloading areas used during wet weather. Interior access road locations and the type of surfacing shall be indicated on a facility plan. The roads within the facility shall be designed so as to minimize the tracking of mud onto the public access road;(B) the landfill method proposed, e.g., moving-face cell or trench, area fill, or combination;(C) elevation of deepest excavation, maximum elevation of waste, maximum elevation of final cover;(D) a calculation of the estimated rate of solid waste deposition and operating life of the landfill unit. As a general rule, 10,000 people with a per capita collection rate of five pounds per day, dispose of 10 - 15 acre-feet of solid waste in one year;(E) landfill unit cross-sections consisting of plan profiles across the facility clearly showing the top of the levee, top of the proposed fill (top of the final cover), maximum elevation of proposed fill, top of the wastes, existing ground, bottom of the excavations, side slopes of trenches and fill areas, gas vents or wells, and groundwater monitoring wells, plus the initial and static levels of any water encountered. The owner or operator shall provide a sufficient number of cross-sections, both latitudinally and longitudinally, so as to accurately depict the existing and proposed depths of all fill areas within the site. The plan portion shall be shown on an inset key map. The fill cross-sections shall go through or very near the soil borings in order that the boring logs obtained from the soils report can also be shown on the profile;(F) construction and design details of compacted perimeter or toe berms that are proposed in conjunction with aboveground (aerial-fill) waste disposal areas shall be included in the fill cross-sections; and(G) a liner quality control plan prepared in accordance with Subchapter H of this chapter.(5) Arid exemption landfill application information. Owners or operators of new, existing, and lateral expansions of small MSW landfill facilities that meet the criteria in § 330.5(b) of this title (relating to Classification of Municipal Solid Waste Facilities) shall submit a certification of eligibility to the executive director and place a copy of the certification in the operating record. The certification shall be signed by a principal executive officer, a ranking elected official, or an independent professional engineer licensed to practice in the State of Texas. The certification must contain the following information: (A) a statement certifying that the small MSW landfill facility meets all requirements contained in § 330.5(b) of this title for exemptions from Subchapter H of this chapter (relating to Liner System Design and Operation) and Subchapter J of this chapter (relating to Groundwater Monitoring and Corrective Action);(B) documentation that the small MSW landfill facility receives for disposal an annual average of less than 20 tons per day of authorized types of waste in a Type IAE landfill unit and/or less than 20 tons per day of authorized types of waste in a Type IVAE landfill unit for a total waste acceptance rate less than 40 tons per day for the facility, based upon the most recent four reporting quarters or a certification that programs have been put in place, or will be implemented, to reduce the annual average to less than 20 tons per day based on an annual average for each landfill unit type within one year;(C) documentation that there are no practicable waste management alternatives available. The documentation shall demonstrate one of the following: (i) additional costs of available alternatives are estimated to exceed 1.0% of the owner's or operating community's budget for all public services;(ii) haul distances to alternative sites are unreasonably long; or(iii) all other alternatives are not feasible to implement, given the community location and economic condition; and(D) documentation that the small MSW landfill unit receives less than or equal to 25 inches of average annual precipitation as determined from precipitation data for the nearest official precipitation recording station for the most recent 30-year reporting period.(6) Type V mobile liquid waste processing units. The owner or operator shall provide the following: (A) documentation of affirmative local government approval or acceptance of the mobile unit operation, including conformity with local ordinances, local rules, or requirements set forth by the treatment facility for the discharge, including local limits, zoning restrictions, permits, licenses, authorizations, etc. These regulations do not grant authorization for operation of mobile liquid waste processing units in noncompliance with local government ordinances and regulations or without the express approval of the local wastewater authority. Discharge from a mobile liquid waste processing unit is allowed only at selected disposal points selected by the local treatment facility permitted under Texas Water Code, Chapter 26, so that they can be monitored by the local treatment facility; and(B) written approval from the receiving treatment facility permitted under Texas Water Code, Chapter 26.(7) Type IX energy, material, gas recovery for beneficial use, or landfill mining waste processing units. The owner or operator shall provide: (A) For wastes to be excavated, a test pit evaluation report prepared by an engineer. Prior approval of a test pit plan must be obtained from the executive director before excavation of test pits including location and depth of all test pits, including a discussion and information on the following: (i) a description of the characteristics of waste observed in test pits excavated on the site to include the percent of paper, plastics, ferrous metal, other metal, glass, other constituents, and soil fraction by weight;(ii) a design for the test pits to extend four feet beneath the waste or to a depth authorized by the executive director and information submitted to include a Toxicity Characteristic Leaching Procedure (TCLP) of the soil to characterize the soil beneath the site. Liners if present shall not be disrupted;(iii) a TCLP analysis of each representative type of waste excavated. Additionally, waste excavated from each test pit must be analyzed for asbestos and polychlorinated biphenyls (PCBs). Consideration should be given to the analysis of waste material from each test pit for hazardous waste constituents;(iv) a determination as to a sufficient number of test pits to establish the properties of the waste. A site of five acres or less must have a minimum of three test pits. Sites larger than five acres must have three test pits plus one for every additional five acres or fraction of an acre. The number of test pits shall be approved by the executive director prior to making the pits. The test pits should be sufficiently large enough to provide representative information;(v) a description of how all test pits will be backfilled with clean high plasticity or low plasticity clay. The excavation shall be backfilled to exceed the existing grade and provide positive drainage;(vi) a cross-section drawing using the information from the test pits to depict the top and bottom elevations of the landfill;(vii) a plan view map depicting the location and extent (vertical and lateral) of the waste unit and proposed extent of mining/recovery operations. In areas with liners, mining operations should not extend below the top of the protective cover of the liner. In areas where no liner exists, excavation operations may extend below the waste;(viii) an evaluation of historical records of landfill operations, where available, to determine such things as hazardous waste potential, receipt of special waste, types of waste received, special waste disposal areas, construction or demolition waste disposal areas, methane and leachate records, age, volume, disposal methods, existence of liners, gas collection systems, and leachate collection systems; and(ix) a description of how all waste removed in test pit evaluation will be disposed of in a permitted landfill;(B) a process description to include: (i) a list of the typical materials intended for processing along with the anticipated volume to be processed. This description shall also contain an estimate of the daily quantity of material to be processed at the facility along with a description of the proposed process of screening for hazardous materials;(ii) the methods of excavating the buried waste materials. The owner or operator shall indicate how the material will be handled, how long it will remain in the area, what equipment will be used, how the material will be moved from the excavation area, how the excavation area will be held to a minimum, the maximum side slopes in buried waste, and the maximum excavation area at any one time. The owner or operator shall provide the sequence of excavation;(iii) the processes used to recover reusable or recyclable material or energy. The narrative shall include any water addition, processing rates, equipment, and mass balance or energy balance calculations;(iv) how any process water will be handled and disposed of if a wet mining process is to be used;(v) a complete narrative on product distribution to include items such as disposition of material or energy recovered and probable use of soils on site and off site; and(vi) a process diagram that depicts the general process;(C) a description of liner system used for excavated waste storage, processing, and screening areas to control seepage and runoff. The liner shall be covered with a material designed to withstand normal traffic from the processing operations; and(D) a description of how waste excavation activities will comply with the minimum design and operation requirements of: (i) §330.149 (relating to Odor Management Plan);(ii) §330.151 (relating to Disease Vector Control);(iii) §330.165 (relating to Landfill Cover); and(iv) §330.167 (relating to Ponded Water).(8) Compost units. The owner or operator shall provide:(A) for mechanical composting systems, a detailed engineering description of the system and the manufacturer's performance data;(B) facility layout, including calculations for area requirements;(C) a description of the movement of the material as it leaves the tipping area indicating how the material is incorporated into the composting process and what handling techniques are used all the way through to the post-processing area. The narrative must include: (iii) mass balance calculations;(iv) use of bulking agents, moisture control, or feed amendments;(v) process monitoring methods;(vi) temperature range and resident time;(vii) storage of compost for curing after the primary composting operation; and(viii) provision for additional drying and screening;(D) a narrative on the post-processing process, including post-processing times, identification and segregation of product, storage of product, and quality assurance and quality control; and(E) a narrative on product distribution including items such as end-product quantities, anticipated final grades, packaging, labeling, loading, marketing, distribution, tracking, and delivery of composted material.(9) Type VI waste processing demonstration facilities. (A) The facility size shall be limited to a liquid waste processing rate no greater than 10,000 gallons per day.(B) The facility design and operation shall be coordinated with a consultant connected with an accredited college or university or with a consultant that has demonstrated the ability to carry out scientific experiments for demonstrating new and unproven waste handling methods and submitted to the executive director. The owner or operator shall submit to the executive director an annual and final status report to document the viability of the method being demonstrated. The report, at a minimum, must document the effluent standards and solid waste standards achieved.(C) The owner or operator may request a variance. (i) In specific cases, the executive director may approve a variance from the requirements of this chapter if the variance is not contrary to safeguarding the health, welfare, and physical property of the people and to protecting the environment. A variance may not be approved concerning the procedural requirements of this chapter.(ii) A request for a variance must be submitted in writing to the executive director. The request may be made in an application for a registration. Any approval of a variance must be in writing from the executive director.(e) Geology report. This portion of the application applies to owners or operators of MSW landfills, compost units, and if otherwise requested by the executive director. The geology report shall be prepared and signed by a qualified groundwater scientist. Previously prepared documents may be submitted but must be supplemented as necessary to provide the requested information. Sources and references for information must be provided. The geology report must contain the following information: (1) a description of the regional geology of the area that includes: (A) a geologic map of the region with text describing the stratigraphy and lithology of the map units. An appropriate section of a published map series such as the Geologic Atlas of Texas prepared by the Bureau of Economic Geology is acceptable; and(B) a description of the generalized stratigraphic column in the facility area from the base of the lowermost aquifer capable of providing usable groundwater, or from a depth of 1,000 feet, whichever is less, to the land surface. The geologic age, lithology, variations in lithology, thickness, depth, geometry, hydraulic conductivity, and depositional history of each geologic unit should be described based upon available geologic information. Regional stratigraphic cross-sections should be provided;(2) a description of the geologic processes active in the vicinity of the facility that includes an identification of any faults and subsidence in the area of the facility. The information about faulting and subsidence shall include at least that required in §330.555(b) and§ 330.559 of this title (relating to Fault Areas and Unstable Areas);(3) a description of the regional aquifers in the vicinity of the facility based upon published and open-file sources that provides:(A) aquifer names and their association with geologic units described in paragraph (2) of this subsection;(B) the composition of the aquifer(s);(C) the hydraulic properties of the aquifer(s);(D) information on whether the aquifers are under water table or artesian conditions;(E) information on whether the aquifers are hydraulically connected;(F) a regional water-table contour map or potentiometric surface map for each aquifer, if available;(G) an estimate of the rate of groundwater flow;(H) typical values or a range of values for total dissolved solids content of groundwater from the aquifers;(I) identification of areas of recharge to the aquifers within five miles of the site; and(J) the present use of groundwater withdrawn from aquifers in the vicinity of the facility. The identification, location, and aquifer of all water wells within one mile of the property boundaries of the facility shall be provided;(4) the results of investigations of subsurface conditions at a particular waste management unit. This report must describe all borings drilled on site to test soils and characterize groundwater and must include a site map drawn to scale showing the surveyed locations and elevations of the borings. Boring logs must include a detailed description of materials encountered including any discontinuities such as fractures, fissures, slickensides, lenses, or seams. Geophysical logs of the boreholes may be useful in evaluating the stratigraphy. Each boring must be presented in the form of a log that contains, at a minimum, the boring number; surface elevation and location coordinates; and a columnar section with text showing the elevation of all contacts between soil and rock layers, description of each layer using the unified soil classification, color, degree of compaction, and moisture content. A key explaining the symbols used on the boring logs and the classification terminology for soil type, consistency, and structure must be provided. The boring plan, including locations and depths of all proposed borings, shall be approved by the executive director prior to initiation of the work. (A) A sufficient number of borings shall be performed to establish subsurface stratigraphy and to determine geotechnical properties of the soils and rocks beneath the facility. Other types of samples may also be taken to provide geologic and geotechnical data. The number of borings necessary can only be determined after the general characteristics of a site are analyzed and will vary depending on the heterogeneity of subsurface materials. Locations with stratigraphic complexities such as non-uniform beds that pinch out, vary significantly in thickness, coalesce, or grade into other units, will require a significantly greater degree of subsurface investigation than areas with simple geologic frameworks.(B) Borings shall be sufficiently deep enough to allow identification of the uppermost aquifer and underlying hydraulically interconnected aquifers. Borings shall penetrate the uppermost aquifer and all deeper hydraulically interconnected aquifers and be deep enough to identify the aquiclude at the lower boundary. All the borings shall be at least five feet deeper than the elevation of the deepest excavation. In addition, at least the number of borings shown on the Table of Borings shall be drilled to a depth at least 30 feet below the deepest excavation planned at the waste management unit, unless the executive director approves a different depth. If no aquifers exist within 50 feet of the elevation of the deepest excavation, at least one test hole shall be drilled to the top of the first perennial aquifer beneath the site, if sufficient data does not exist to accurately locate it. The executive director may accept data equivalent to a deep boring on the site to determine information for aquifers more than 50 feet below the site. Aquifers more than 300 feet below the lowest excavation and where the estimated travel times for constituents to the aquifer are in excess of 30 years plus the estimated life of the site need not be identified through borings. Attached Graphic
(C) All borings shall be conducted in accordance with established field exploration methods. The hollow-stem auger boring method is recommended for softer materials; coring may be required for harder rocks. Other methods shall be used as necessary to obtain adequate samples for soil testing required in this paragraph. Investigation procedures shall be discussed in the report.(D) Installation, abandonment, and plugging of the borings in accordance with the rules of the commission.(E) Both the number and depth of borings may be modified because of site conditions with approval of the executive director.(F) Geophysical methods, such as electrical resistivity, may be used with authorization of the executive director to reduce the number of borings that may be necessary or to provide additional information between borings.(G) Cross-sections must be prepared from the borings depicting the generalized strata at the facility. For small waste management units, two perpendicular cross-sections will normally suffice.(H) A narrative that describes the investigator's interpretations of the subsurface stratigraphy based upon the field investigation shall be provided;(5) geotechnical data that describes the geotechnical properties of the subsurface soil materials and a discussion with conclusions about the suitability of the soils and strata for the uses for which they are intended. All geotechnical tests shall be performed in accordance with industry practice and recognized procedures such as described below. A brief discussion of geotechnical test procedures including: (A) a laboratory report of soil characteristics determined from at least one sample from each soil layer or stratum that will form the bottom and side of the proposed excavation and from those that are less than 30 feet below the lowest elevation of the proposed excavation. Additional tests shall be performed, as necessary, to provide a typical profile of soil stratification within the site. No laboratory work need be performed on highly permeable soil layers such as sand or gravel. The samples shall be tested by a competent independent third-party soils laboratory;(B) permeability tests performed according to one of the following standards on undisturbed soil samples. Permeability tests shall be performed using tap water or .05 Normal solution of calcium sulfate (CaSO 4), and not distilled water, as the permeant. Those undisturbed samples that represent the sidewall of any proposed cell, pit, or excavation shall be tested for the coefficient of permeability on the sample's in-situ horizontal axis; all others shall be tested on the in-situ vertical axis. All test results shall indicate the type of tests used and the orientation of each tested sample. All calculations for the final coefficient of permeability tests result for each sample tested shall be included in the report:(i) constant head with back pressure per Appendix VII of Corps of Engineers Manual EM1110-2-1906, "Laboratory Soils Testing;" American Society for Testing and Materials (ASTM) D5084 "Saturated Porous Materials Using a Flexible Wall Permeameter";(ii) falling head per Appendix VII of Corps of Engineers Manual EM1110-2-1906, "Laboratory Soils Testing";(iii) sieve analysis for the 200, and less than 200 fraction per ASTM D1140;(iv) Atterberg limits per ASTM D4318; and(v) moisture content per ASTM D2216;(C) the depth at which groundwater was encountered and records of after-equilibrium measurements in all borings. The cross-sections prepared in response to paragraph (4)(G) of this subsection must be annotated to note the level at which groundwater was first encountered and the level of groundwater after equilibrium is reached or just prior to plugging, whichever is later. This water-level information must also be presented on all borings required by paragraph (4) of this subsection and presented in a table format in the report;(D) records of water-level measurements in monitoring wells. Historic water-level measurements made during any previous groundwater monitoring shall be presented in a table for each well;(E) a tabulation of all relevant groundwater monitoring data from wells on site or on adjacent MSW landfill unit(s); and(F) identification of the uppermost aquifer and any lower aquifers that are hydraulically connected to it beneath the facility, including groundwater flow direction and rate, and the basis for such identification (i.e., the information obtained from hydrogeologic investigations of the facility area);(6) for owners and operators seeking an arid exemption for their landfill unit designs, a groundwater certification process must be used for meeting the provisions for groundwater certification of the arid exemption, as described in § 330.5(b) of this title:(A) locate and plot the facility accurately on a topographic map (7.5-minute or 15-minute United States Geological Survey quadrangle). Draw a line to enclose all of the area within one mile of the facility boundary;(B) visit the facility and locate by physical inspection water wells and springs in the facility area. Determine the locations and plot them on the topographic map: (i) if no wells or springs exist within the facility area, refer to subparagraph (I) of this paragraph. Otherwise, refer to clause (ii) of this subparagraph; and(ii) determine from appropriate records (for example, water-well drillers, pump installers, city records, underground water conservation district, Texas Water Development Board, Texas Commission on Environmental Quality, United States Geological Survey, etc.) which of the wells are completed in the shallowest aquifer. If no wells are completed in the shallowest aquifer or if the shallowest aquifer is more than 150 feet below the land surface at the facility, refer to subparagraph (I) of this paragraph. Otherwise, refer to subparagraph (C) of this paragraph;(C) determine the groundwater gradient of the shallowest aquifer in the vicinity of the facility. This can be done by measuring stabilized water levels in wells completed in the shallowest aquifer in the facility area (from subparagraph (B)(ii) of this paragraph) or from previous hydrogeologic studies using contemporaneous stabilized water-level measurements. Care should be taken to measure water levels when nearby high-volume wells, such as irrigation wells, have not been pumped for a long enough period to allow the water level to stabilize. Where no data exist or cannot be determined, the regional gradient can be used;(D) from springs and from the wells completed in the shallowest aquifer, select the two wells/springs downgradient of and nearest to the facility based on the findings from subparagraph (C) of this paragraph. Select a well/spring upgradient or lateral to the facility, where groundwater quality is not likely to have been affected by landfill activities and preferably not by other human activities such as oil and gas operations, feedlots, sewage treatment plants, septic systems, etc;(E) sample the three selected wells/springs determined by subparagraphs (C) and (D) of this paragraph in accordance with accepted practices, such as described in technical guidance from the executive director. The owner or operator shall have the samples analyzed by a qualified laboratory for the following parameters:(iv) total dissolved solids;(v) specific conductance;(viii) non-purgeable organic carbon; and(ix) volatile organic compounds listed in § 330.419 of this title (relating to Constituents for Detection Monitoring);(F) if permission cannot be obtained to sample one or more of the three selected wells/springs, select one or more alternate wells/springs, within the plotted area. If fewer than three wells/springs are available, sample those that are available;(G) if permission cannot be obtained to sample any appropriately located wells/springs, submit written documentation of the facts to the executive director. If the executive director confirms that permission cannot be obtained for sampling, the well(s) may be eliminated from consideration;(H) compile the data from subparagraphs (A) - (F) of this paragraph in a report that includes: (i) a map showing all known wells, springs, facility boundaries, sampling points, etc.;(ii) a map showing the groundwater gradient and data points;(iii) chemical analyses, showing analytical methods used;(iv) logs and construction information for the sampled wells and description and flow rate for sampled springs;(v) text describing methods of investigation, such as sampling and water-level measurements; and(vi) conclusions with respect to presence or lack of evidence of groundwater contamination by the facility;(I) where no wells or springs are present in the facility area or the shallowest water level is more than 150 feet below land surface at the facility, submit a brief report describing the facility (with a map of the area) and the method(s) of determining the lack of appropriate sampling points or depth to the shallowest aquifer. Confirmed absence of sampling points will be deemed to be "no evidence of groundwater contamination";(J) the report shall be signed and sealed by the qualified groundwater scientist who reviewed the data and reached the conclusions;(K) if there is no evidence of groundwater contamination by the landfill, the qualified groundwater scientist who reviewed the data and reached the conclusions shall sign and seal a statement in the following format: "I (we) have reviewed the groundwater data described in a report submitted with this certification and have found no evidence that the __________ municipal solid waste landfill located at ___________ has contaminated groundwater in the uppermost aquifer"; and(L) the executive director may accept information and data, other than described in this paragraph, as showing that there is no evidence of groundwater contamination by the landfill, if the information and data are deemed to be adequate for such a determination.(f) Groundwater sampling and analysis plan. The groundwater sampling and analysis plan for landfills and if otherwise requested by the executive director for other MSW units must be prepared in accordance with Subchapter J of this chapter (relating to Groundwater Monitoring and Corrective Action). The groundwater sampling and analysis plan for composting operations that require a permit must be prepared in accordance with the groundwater monitoring requirements of § 332.47(6)(C)(ii) of this title (relating to Permit Application Preparation). As part of this plan for Type I landfills, submit the following: (1) on a topographic map, a delineation of the waste management area, the property boundary, the proposed point of compliance as defined under § 330.3 of this title (relating to Definitions), the proposed location of groundwater monitoring wells as required under § 330.403 of this title (relating to Groundwater Monitoring Systems);(2) a description of any plume of contamination that has entered the groundwater from an MSW management unit at the time that the application was submitted. In addition: (A) delineate the extent of the plume on the topographic map required in paragraph (1) of this subsection; and(B) identify the concentration of each assessment constituent as defined in § 330.409 of this title (relating to Assessment Monitoring Program) throughout the plume or identify the maximum concentration of each assessment constituent in the plume;(3) an analysis of the most likely pathway(s) for pollutant migration in the event that the primary barrier liner system is penetrated. This must include any groundwater modeling data and results as described in § 330.403(e)(2) of this title and consider changes in groundwater flow that are expected to result from construction of the facility;(4) detailed plans and an engineering report describing the proposed groundwater monitoring program to be implemented to meet the requirements of § 330.403 of this title;(5) if the hazardous constituents listed in the table located in 40 Code of Federal Regulations Part 258, Appendix I, and § 330.419 of this title have not been detected in the groundwater at the time of permit application, the owner or operator shall submit sufficient information, supporting data, and analyses to establish a detection monitoring program that meets the requirements of § 330.407 of this title (relating to Detection Monitoring Program for Type I Landfills). This submission must address the following items as specified in § 330.407 of this title: (A) a proposed groundwater monitoring system;(B) background values for each monitoring parameter or constituent listed in § 330.419 of this title, or procedures to calculate such values; and(C) a description of proposed sampling, analysis, and statistical comparison procedures to be utilized in evaluating groundwater monitoring data;(6) if the presence of hazardous constituents listed in § 330.419 of this title has been detected in the groundwater at the time of the permit application, the owner or operator shall submit sufficient information, supporting data, and analyses to establish an assessment monitoring program that meets the requirements of § 330.409 of this title. To demonstrate compliance with § 330.409 of this title, the owner or operator shall address the following items: (A) a description of any special wastes previously handled at the MSW facility;(B) a characterization of the contaminated groundwater, including concentration of assessment constituents as defined in § 330.409 of this title;(C) a list of assessment constituents as defined in § 330.409 of this title for which assessment monitoring will be undertaken in accordance with § 330.405 of this title (relating to Groundwater Sampling and Analysis Requirements) and § 330.409 of this title;(D) detailed plans and an engineering report describing the proposed groundwater monitoring system, in accordance with the requirements of § 330.405 of this title; and(E) a description of proposed sampling, analysis, and statistical comparison procedures to be utilized in evaluating groundwater monitoring data; and(7) if hazardous constituents have been measured in the groundwater that exceed the concentration limits established in § 330.409 of this title, the owner or operator shall submit sufficient information, supporting data, and analyses to establish a corrective action program that meets the requirements of § 330.411 and § 330.413 of this title (relating to Assessment of Corrective Measures and Selection of Remedy). To demonstrate compliance with § 330.411 of this title, the owner or operator shall address, at a minimum, the following: (A) a characterization of the contaminated groundwater, including concentrations of assessment constituents as defined in § 330.409 of this title;(B) the concentration limit for each constituent found in the groundwater;(C) detailed plans and an engineering report describing the corrective action to be taken;(D) a description of how the groundwater monitoring program will demonstrate the adequacy of the corrective action; and(E) a schedule for submittal of the information required in subparagraphs (C) and (D) of this paragraph provided the owner or operator obtains written authorization from the executive director prior to submittal of the complete permit application.(g) Landfill gas management plan. A facility gas management plan shall be prepared to address all of the requirements in Subchapter I of this chapter (relating to Landfill Gas Management).(h) Closure plan. The facility closure plan shall be prepared in accordance with Subchapter K of this chapter (relating to Closure and Post-Closure). For a landfill unit, the closure plan will include a contour map showing the final constructed contour of the entire landfill to include internal drainage and side slopes plus accommodation of surface drainage entering and departing the completed fill area plus areas subject to flooding due to a 100-year frequency flood. Cross-sections shall be provided.(i) Post-closure plan. The facility post-closure care plan shall be prepared in accordance with Subchapter K of this chapter.(j) Cost estimate for closure and post-closure care. The owner or operator shall submit a cost estimate for closure and post-closure care in accordance with Subchapter L of this chapter (relating to Closure, Post-Closure, and Corrective Action Cost Estimates). For an existing facility, the owner or operator shall also submit a copy of the documentation required to demonstrate financial assurance as specified in Chapter 37, Subchapter R of this title (relating to Financial Assurance for Municipal Solid Waste Facilities). For a new facility, a copy of the required documentation shall be submitted 60 days prior to the initial receipt of waste.30 Tex. Admin. Code § 330.63
The provisions of this §330.63 adopted to be effective March 27, 2006, 31 TexReg 2502