Section 330.7 - Permit Required(a) Except as provided in §§ 330.9, 330.11, 330.13, or 330.25 of this title (relating to Registration Required; Notification Required; Waste Management Activities Exempt from Permitting, Registration, or Notification; and Relationship with County Licensing System), no person may cause, suffer, allow, or permit any activity of storage, processing, removal, or disposal of any solid waste unless such activity is authorized by a permit or other authorization from the commission. In the event this requirement is violated, the executive director may seek recourse against not only the person that stored, processed, or disposed of the waste but also against the generator, transporter, owner or operator, or other person who caused, suffered, allowed, or permitted its waste to be stored, processed, or disposed. No person may commence physical construction of a new municipal solid waste (MSW) management facility, a vertical expansion, or a lateral expansion without first having submitted a permit application in accordance with §§ 330.57, 330.59, 330.61, 330.63, and 330.65 of this title (relating to Permit and Registration Applications for Municipal Solid Waste Facilities; Contents of Part I of the Application; Contents of Part II of the Application; Contents of Part III of the Application; and Contents of Part IV of the Application, respectively) and received a permit from the commission, except as provided otherwise in this section.(b) A separate permit is required for the storage, transportation, or handling of used oil mixtures collected from oil/water separators. Any person that intends to conduct such activity shall comply with the regulatory requirements of Chapter 324 of this title (relating to Used Oil Standards).(c) Permits by rule may be granted for persons that compact or transport waste in enclosed containers or enclosed transportation units to a Type IV facility. (1) A permit by rule is granted for a generator operating a stationary compactor that is only used to compact waste to be disposed of at a Type IV landfill, if all of the following conditions are met.(A) The generator submits the following information and any requested additional information on forms provided by the executive director:(i) generator contact person, company name, mailing address, street address, city, state, ZIP code, and telephone number;(ii) contract renewal date, if applicable;(iii) rated compaction capability in pounds per cubic yard;(v) description of waste stream to enter compactor;(vi) receiving MSW Type IV disposal facility name, permit number, mailing address, street address, city, state, ZIP code, telephone number, and contact person; and(vii) a certification from the generator that states the following: I, (name) ________________________ (title) ___________________________________ of (company name) __________________, located at (street address) ________________________ in (city) _____________________________________, certify that the contents of the compactor located at the location stated herein are free of and shall be maintained free of putrescible, hazardous, infectious, and any other waste not allowed in an MSW Type IV landfill.(B) The generator submits a $75 fee along with the claim for the permit by rule.(C) The generator complies with the operational requirements of § 330.215 of this title (relating to Requirements for Stationary Compactors).(D) A stationary compactor permit by rule expires after one year. The generator must submit an annual renewal fee in the amount of $75. Failure to timely pay the annual fee eliminates the option of disposal of these wastes at a Type IV landfill until the generator claims a new or renewed permit by rule.(2) A permit by rule is granted for transporters using enclosed containers or enclosed vehicles to collect and transport brush, construction or demolition wastes, and rubbish along special collection routes to MSW Type IV landfill facilities if all of the following conditions are met.(A) The owner or operator seeking a special collection route permit by rule submits to the executive director the following information and any requested additional information on forms provided by the executive director:(i) name of owner and operator, mailing address, street address, city, state, ZIP code, name and title of a contact person, and telephone number;(ii) receiving MSW Type IV disposal facility name, permit number, mailing address, street address, city, state, ZIP code, telephone number, and contact person;(iii) information on each transportation unit, including, at a minimum, license number, vehicle identification number, year model, make, capacity in cubic yards, and rated compaction capability in pounds per cubic yard;(iv) route information, which shall include as a minimum the collection frequency, the day of the week the route is to be collected, and the day and time span within which the route is to arrive at the MSW Type IV landfill;(v) a description of the wastes to be transported;(vi) an alternative contingency disposal plan to include alternate trucks to be used or alternative disposal facilities; and(vii) a signed and notarized certification from the owner or operator that states the following: I, (name) _______, (title) _______, of _______ operating in ______ County, certify that the contents of the vehicles described above will be free of putrescible, household, hazardous, infectious, or any other waste not allowed in an MSW Type IV landfill.(B) The transporter submits a $100 per vehicle fee along with the claim for a permit by rule.(C) The transporter documents each load delivered with a trip ticket form provided by the executive director, and provides the trip ticket to the landfill operator prior to discharging the load.(D) A special collection route permit by rule expires after one year. The owner or operator must submit an annual renewal fee in the amount of $100 per vehicle. Failure to timely pay the annual fee eliminates the option of disposal of these wastes at a Type IV landfill until the owner or operator claims a new or renewed permit by rule.(E) This paragraph does not apply if the waste load is from a single collection point that is a stationary compactor authorized in accordance with paragraph (1) of this subsection.(3) Revision requirements for stationary compactor permits or special collection route permits by rule identified in paragraphs (1) and (2) of this subsection are as follows.(A) An update must be submitted if any information within the original permit by rule submittal changes.(B) A submittal to update an existing permit by rule must include all of the same documentation required for an original permit by rule submittal.(d) A major permit amendment, as defined by § 305.62 of this title (relating to Amendments), is required to reopen a Type I, Type IAE, Type IV, or Type IVAE MSW facility permitted by the commission or any of its predecessor or successor agencies that has either stopped accepting waste, or only accepted waste in accordance with an emergency authorization, for a period of five years or longer. The MSW facilities covered by this subsection may not be reopened to accept waste again unless the permittee demonstrates compliance with all applicable requirements of the Resource Conservation and Recovery Act, Subtitle D and the implementing Texas state regulations. If an MSW facility was subject to a contract of sale on January 1, 2001, the scope of any public hearing held on the permit amendment required by this subsection is limited to land use compatibility, as provided by § 330.57(a) of this title. This subsection does not apply to any MSW facility that has received a permit but never received waste, or that received an approved Subtitle D permit modification before September 1, 2001.(e) A permit by rule is granted for an animal crematory that meets the following criteria. For facilities that do not meet all the requirements of this subsection, the owner or operator shall submit a permit application under §§ 330.57, 330.59, 330.61, 330.63, and 330.65 of this title and obtain a permit. To qualify for a permit by rule under this subsection, the following requirements must be met. (1) General prohibitions. An animal crematory facility shall comply with § 330.15(a) of this title (relating to General Prohibitions).(2) Incineration limits. Incineration of carcasses shall be limited to the conditions specified in § 106.494 of this title (relating to Pathological Waste Incinerators (Previously SE 90)). The facility shall not accept animal carcasses that weigh more than the capacity of the largest incinerator at the facility and shall not dismember any carcasses during processing.(3) Ash control. Ash disposal must be at an authorized facility unless the ash is returned to the animal owner or sent to a pet cemetery. Ash shall be stored in an enclosed container that will prevent release of the ash to the environment. There shall be no more than 2,000 pounds of ash stored at an animal crematory at any given time.(4) Air pollution control. Air emissions from the facility shall not cause or contribute to a condition of air pollution as defined in Texas Clean Air Act, §382.003. All animal crematories, prior to construction or modification, must have an air permit issued under Chapter 116 of this title (relating to Control of Air Pollution by Permits for New Construction or Modification), or qualify for a permit by rule under § 106.494 of this title.(5) Fire protection. The facility shall prepare, maintain, and follow a fire protection plan. This fire protection plan shall describe fire protection resources (a local fire department, fire hydrants, fire extinguishers, water tanks, water well, etc.), and employee training and safety procedures. The fire protection plan shall comply with local fire codes.(6) Storage limits. Carcasses must be incinerated within two hours of receipt, unless stored at or below a temperature of 29 degrees Fahrenheit. Storage of carcasses shall be in a manner that minimizes the release of odors. Storage of carcasses shall be limited to the lesser of 3,200 pounds or the amount that can be incinerated at the maximum loading rate for the incinerators at the facility in a two-day period.(7) Unauthorized waste. Only carcasses or animal parts, with any associated packaging, shall be processed. Carcasses shall not be accepted in packaging that includes any chlorinated plastics. Carcasses or animal parts that are either hazardous waste or medical waste are prohibited.(8) Cleaning. Storage and processing units must be properly cleaned on a routine basis to prevent odors and the breeding of flies.(9) Nuisance prevention. The facility shall be designed and operated in a manner so as to prevent nuisance conditions, including, but not limited to, dust from ashes, disease vectors, odors, and liquids from spills, from being released from the property boundary of the authorized facility.(10) Diseased animals. The facility shall be equipped with appropriate protective equipment and clothing for personnel handling diseased animals that may be received at the facility. Facility owners or operators must inform customers and local veterinarians of the need to identify diseased animals for the protection of personnel handling the animals.(11) Buffer zone. An animal crematory, including unloading and storage areas, constructed after March 2, 2003, must be at least 50 feet from the property boundary of the facility.(12) Operating hours. A crematory shall operate within the time frames allowed by § 111.129 of this title (relating to Operating Requirements).(13) Documentation. The operator of an animal crematory shall document the carcasses' weight, date and time when carcasses are received, and when carcasses are loaded into the incinerator. A separate entry in the records for loading into the incinerator is not required if a carcass is loaded within two hours of receipt. This information will be maintained in records on site.(14) Breakdown. The facility is subject to § 330.241 of this title (relating to Overloading and Breakdown).(15) Records management. The owner or operator must retain records as follows: (A) maintain a copy of all requirements of this subsection that apply to the facility;(B) maintain records for the previous consecutive 12-month period containing sufficient information to demonstrate compliance with all requirements of this subsection;(C) keep all required records at the facility; and(D) make the records available upon request to personnel from the commission or from local governments with jurisdiction over the facility.(16) Fees. An animal crematory facility authorized under this section is exempt from the fee requirements of Subchapter P of this chapter (relating to Fees and Reporting).(17) Other requirements. No other requirements under this chapter are applicable to a facility that meets all of the requirements of this subsection.(f) A permit by rule is granted for a dual chamber incinerator if the owner or operator complies with § 106.491 of this title (relating to Dual-Chamber Incinerators).(g) A permit by rule is granted for an air curtain incinerator if the owner or operator complies with § 106.496 of this title (relating to Air Curtain Incinerators). An air curtain incinerator may not be located within 300 feet of an active or closed MSW landfill unit boundary.(h) A standard air permit is granted for facilities that comply with Subchapter U of this chapter (relating to Standard Air Permits for Municipal Solid Waste Landfill Facilities and Transfer Stations).(i) A permit by rule is granted for a period of up to five years to a county or municipality with a population of 12,000 people or less to dispose of demolition waste from properties with nuisance or abandoned buildings. (1) Requirements. The following conditions must be met.(A) Form submittal. The county or municipality submits a form provided by the commission to the executive director for review and approval before construction begins.(B) Notice to regional office. The county or municipality notifies the applicable commission regional office of the intent to dispose of waste under this authorization at least 48 hours prior to accepting the first load of waste.(C) Facility location. The location where disposal will occur:(i) is owned or controlled by the county or municipality, and(ii) receives less than or equal to 25 inches average annual precipitation as determined from precipitation data for the nearest official precipitation recording station for at least the most recent 30-year reporting period or by another method approved by the executive director.(D) Sources of waste. The properties on which nuisance and abandoned buildings are located have been acquired by the county or municipality by means of bankruptcy, tax delinquency, or condemnation, and the previous owners are not financially capable of paying the costs of the disposal of demolition waste at a permitted solid waste disposal facility, including transportation of the waste to the facility.(E) Waste acceptance. (i) Prior to demolition, structures are surveyed and abated, if required, for asbestos-containing materials in accordance with 25 TAC Chapter 295, Subchapter C (relating to Texas Asbestos Health Protection).(ii) The facility may accept non-regulated asbestos-containing materials (non-RACM) for disposal. The wastes are placed on the active working face and covered at the end of the operating day with at least six inches of soil. Under no circumstances may any of the material containing non-RACM be placed on a surface that is subject to vehicular traffic or disposed of by any other means by which the material could be crumbled into a friable state.(iii) The facility may accept regulated asbestos-containing materials (RACM) if the following conditions are met. (I) The county or municipality notifies the executive director on a form provided by the commission in accordance with subparagraph (A) of this paragraph.(II) All waste trenches are identified as receiving RACM, and deed records required under subparagraph (Q) of this paragraph include an indication that the waste trench(es) received RACM.(III) RACM is transported and received at the facility in tightly closed and unruptured containers or bags or wrapped with at least six-mil polyethylene.(IV) Bags or containers holding RACM are carefully unloaded and placed in the final disposal location. RACM is then covered immediately with at least six inches of soil. Care is taken during unloading and placement of RACM and during application of the cover so that the bags or containers are not ruptured.(iv) Waste is limited to the abandoned or nuisance buildings and materials from the property on which the buildings are located. All waste disposed under this authorization must meet the limitations of § 330.5(a)(2) of this title (relating to Classification of Municipal Solid Waste Facilities) and may not include waste prohibited under § 330.15(e) of this title.(F) Access control. Access to the disposal facility is controlled by means of fences, other artificial barriers, natural barriers, or a combination of these methods, and includes a locking gate.(G) Buffers and easements. The county or municipality maintains a minimum distance of 50 feet as a buffer between the permit boundary and waste storage, processing and disposal areas. No disposal occurs within a utility or pipeline easement or within 25 feet of the center of a utility or pipeline easement.(H) Below-grade placement. Waste is placed only below grade. The top of final cover is placed at pre-existing grade or up to three feet above pre-existing grade to ensure that natural drainage patterns are not altered and ponding of water over waste is prevented.(I) Weekly cover. Waste is covered at least weekly with six inches of earthen material not previously mixed with waste, or by tarps. Use of tarps as cover is limited to a seven-day period after which the county or municipality must replace the tarp with either waste or a six-inch layer of earthen material not previously mixed with waste. Tarps may not be used in place of soil cover requirements relating to non-RACM and RACM in subparagraph (E)(ii) and (iii) of this paragraph. Any trench that has received waste but will be inactive for more than 180 days receives intermediate cover in accordance with subparagraph (J) of this paragraph, or final cover in accordance with subparagraph (P) of this paragraph.(J) Intermediate cover. Waste is covered, including any soil weekly cover, with twelve inches of well compacted earthen material not previously mixed with waste.(K) Maximum volume. The design waste disposal volume is less than 2.5 million cubic meters in accordance with § 106.534(3) of this title (relating to Municipal Solid Waste Landfills and Transfer Stations).(L) Facility signs. At all entrances through which waste is received, the facility conspicuously displays a sign with letters at least three inches in height providing a statement that the facility is "NOT FOR PUBLIC USE," an emergency 24-hour contact number that reaches an individual with the authority to obligate the facility at all times that the facility is not in operation, and the local emergency fire department number.(M) Stormwater and contaminated water. The county or municipality constructs berms to divert the 25-year/24-hour storm event from entering excavations containing waste. Water that has contacted waste is managed as contaminated water and disposed at an authorized treatment facility.(N) Reporting. The county or municipality, while not required to provide quarterly reporting, provides annual reporting in accordance with the annual reporting provisions of § 330.675(a) of this title (relating to Reports).(O) Reauthorization. Before reaching the permit by rule term limit of five years, the county or municipality may request reauthorization under the permit by rule by submitting a form that is current at the time of reauthorization, provided by the commission in accordance with subparagraph (A) of this paragraph, to the executive director at least 14 days before the end of the permit term.(P) Final cover. The following conditions are met.(i) Within 60 days after a trench reaches its capacity or waste deposition activities are complete in a trench, the county or municipality installs final cover over waste in the trench. Final cover shall be composed of no less than two feet of soil. The first 18 inches or more of cover shall be of compacted clayey soil, classification sand clay (SC) or low plasticity clay (CL) as defined in the "Unified Soils Classification System" developed by the United States Army Corps of Engineers, and placed and compacted in layers of no more than six inches to minimize the potential for water infiltration. A high plasticity clayey (CH) soil may be used; however, this soil may experience excessive cracking and shall therefore be covered by a minimum of 12 inches of topsoil to retain moisture. Other types of soil may be used with prior written approval from the executive director. The final six inches of cover shall be of suitable topsoil that is capable of sustaining native plant growth and shall be seeded or sodded as soon as practicable following the application of the final cover in order to minimize erosion.(ii) The trench final cover procedures listed in clause (i) of this subparagraph are completed before facility closure, as described in subparagraph (Q) of this paragraph. If these procedures cannot be performed before the permit by rule term limit is reached, the county or municipality submits a current application form for reauthorization of the permit by rule to the executive director at least 14 days before the end of the permit term.(Q) Facility closure. The county or municipality notifies the executive director and the applicable regional office at least 60 days before the anticipated closure date of the facility. Within ten days after closure, submit to the executive director by registered mail a certified copy of an "affidavit to the public" in accordance with the requirements of § 330.19 of this title (relating to Deed Recordation). In addition, record a certified notation of the deed to the facility property, or on some other instrument that is normally examined during title search, that will in perpetuity notify any potential purchaser of the property that the land has been used as a landfill facility and use of the land is restricted. Submit a certified deed to the executive director.(2) Other provisions. The following provisions also apply to this authorization. (A) Processing. This permit by rule also authorizes the processing of waste destined for the disposal unit. Authorized processing is limited to volume reduction, such as chipping or grinding, but not burning. Processing must occur within the permit boundary and may not occur within a buffer zone or right-of-way. Tires, RACM and non-RACM may not be processed. If required, the county or municipality must obtain authorization for air emissions resulting from this processing.(B) Fees. Waste that is disposed under this authorization is not subject to the fee requirements of Subchapter P of this chapter.(C) Other requirements. No other requirements under this chapter are applicable to a facility that meets all the requirements of this subsection.30 Tex. Admin. Code § 330.7
The provisions of this §330.7 adopted to be effective March 27, 2006, 31 TexReg 2502; amended to be effective August 16, 2012, 37 TexReg 6072; amended to be effective July 31, 2014, 39 TexReg 5796