Section 217.121 - Coarse Screens(a) A wastewater treatment facility must use a coarse screen, unless all flow entering a wastewater treatment facility is processed through a grinder pump or grinding device.(b) A coarse screen must include an emergency overflow sized to handle the peak flow of the wastewater treatment facility.(c) A coarse screen must include a way to divert flow to the emergency overflow.(d) If the primary channel uses a mechanically cleaned coarse screen, the emergency overflow must also have a coarse screen.(e) Coarse Screen Design. (1) For a manually cleaned coarse screen, the clear openings between the bars must be at least 0.5 inch but not more than 1.0 inch.(2) For a mechanically cleaned coarse screen, the clear openings between the bars must be at least 0.25 inch but not more than 1.0 inch.(3) A manually cleaned coarse screen must use a bar rack sloped at least 30 degrees but not more than 60 degrees from horizontal.(4) A manually cleaned coarse screen must be attached to a horizontal platform that allows draining and temporary screenings storage to prevent unauthorized discharge between cleanings.(5) A mechanically cleaned coarse screen must be designed with equipment that automatically collects and disposes of screenings.(f) Coarse Screen Hydraulics. (1) The velocity of wastewater through a coarse screen must be at least 1.0 foot per second, but not more than 3.0 feet per second at design flow.(2) The inlet channel for a coarse screen must be designed to minimize the deposition of solids.(3) The flow line of the inlet channel must not exceed 6.0 inches below the invert elevation of the influent.(g) Corrosion Resistance. A coarse screen and related structures must be designed to resist the effects of a corrosive environment, including long-term exposure to hydrogen sulfide.30 Tex. Admin. Code § 217.121
The provisions of this §217.121 adopted to be effective August 28, 2008, 33 TexReg 6843; Amended by Texas Register, Volume 40, Number 47, November 20, 2015, TexReg 8315, eff. 12/4/2015