Section 115.234 - Inspection Requirements(a) No person in the Beaumont/Port Arthur, Dallas/Fort Worth, El Paso, and Houston/Galveston areas, as defined in § 115.10 of this title (relating to Definitions), shall allow a tank-truck tank to be filled with or emptied of gasoline at any facility subject to § 115.214(a)(1)(C) or § 115.224(2) of this title (relating to Inspection Requirements), or filled with non-gasoline volatile organic compounds (VOC) having a true vapor pressure greater than or equal to 0.5 pounds per square inch absolute under actual storage conditions at any facility subject to § 115.214(a)(1)(C) of this title, unless the tank-truck tank has passed a leak-tight test within the past year as evidenced by a prominently displayed certification affixed near the United States Department of Transportation certification plate which: (1) shows the date the tank-truck tank last passed the leak-tight test required by § 115.235 of this title (relating to Approved Test Methods); and(2) shows the identification number of the tank-truck tank.(b) No person in the covered attainment counties, as defined in § 115.10 of this title, shall allow a gasoline tank-truck tank to be filled or emptied at any facility subject to § 115.214(b)(1)(C) or § 115.224(2) of this title unless the tank-truck tank has passed a leak-tight test within the past year as evidenced by a prominently displayed certification affixed near the United States Department of Transportation certification plate which: (1) shows the date the gasoline tank-truck tank last passed the leak-tight test required by § 115.235 of this title; and(2) shows the identification number of the tank-truck tank.30 Tex. Admin. Code § 115.234
The provisions of this §115.234 adopted to be effective February 19, 1990, 15 TexReg 549; amended to be effective August 1, 1992, 17 TexReg 4683; amended to be effective December 3, 1993, 18 TexReg 8538; amended to be effective July 21, 1999, 24 TexReg 5488