Section 115.214 - Inspection Requirements(a) The owner or operator of each volatile organic compound (VOC) transfer operation in the Beaumont/Port Arthur, Dallas/Fort Worth, El Paso, and Houston/Galveston areas shall comply with the following inspection requirements. (1) Land-based VOC transfer to or from transport vessels. (A) During each VOC transfer, the owner or operator of the transfer operation or of the transport vessel shall inspect for:(i) visible liquid leaks;(B) VOC loading or unloading through the affected transfer lines shall be discontinued immediately when a leak is observed and shall not be resumed until the observed leak is repaired.(C) All tank-truck tanks being filled with or emptied of gasoline, or being filled with non-gasoline VOC having a true vapor pressure greater than or equal to 0.5 pounds per square inch absolute under actual storage conditions, shall have been leak tested within one year in accordance with the requirements of §§ 115.234- 115.237 of this title (relating to Control of Volatile Organic Compound Leaks From Transport Vessels) as evidenced by prominently displayed certification affixed near the United States Department of Transportation certification plate.(D) Subparagraphs (A) and (B) of this paragraph do not apply to fumes from hatches or vents if the fumes result from: (i) a VOC transfer which is exempt from § 115.211 or § 115.212(a)(1) of this title (relating to Emission Specifications; and Control Requirements) under § 115.217(a) of this title (relating to Exemptions); or(ii) a VOC loading operation which, under the 90% control option in § 115.213(b) of this title (relating to Alternate Control Requirements), is not required to control vapors caused by loading VOC.(2) Gasoline terminals-additional inspection. The owner or operator of each gasoline terminal shall perform a monthly leak inspection of all equipment in gasoline service. Each piece of equipment shall be inspected during the loading of gasoline tank-trucks. For this inspection, detection methods incorporating sight, sound, and smell are acceptable. Alternatively, a hydrocarbon gas analyzer may be used for the detection of leaks, by meeting the requirements of §§ 115.352- 115.357 of this title (relating to Fugitive Emission Control in Petroleum Refining, Natural Gas/Gasoline Processing, and Petrochemical Processes in Ozone Nonattainment Areas). Every reasonable effort shall be made to repair or replace a leaking component within 15 days after a leak is found. If the repair or replacement of a leaking component would require a unit shutdown, the repair may be delayed until the next scheduled shutdown.(3) Marine terminals. For marine terminals in the Houston/Galveston area, the following inspection requirements apply. (A) Before loading a marine vessel with a VOC which has a vapor pressure equal to or greater than 0.5 pounds per square inch absolute under actual storage conditions, the owner or operator of the marine terminal shall verify that the marine vessel has passed an annual vapor tightness test as specified in § 115.215(7) of this title (relating to Approved Test Methods). If no documentation of the annual vapor tightness test is available, one of the following methods may be substituted. (i) VOC shall be loaded into the marine vessel with the vessel product tank at negative gauge pressure.(ii) Leak testing shall be performed during loading using Test Method 21. The testing shall be conducted during the final 20% of loading of each product tank of the marine vessel and shall be applied to any potential sources of vapor leaks on the vessel.(iii) Documentation of leak testing conducted during the preceding 12 months as described in clause (ii) of this subparagraph shall be provided.(B) During each VOC transfer, the owner or operator of the marine terminal or of the marine vessel shall inspect for: (i) visible liquid leaks;(C) If a liquid leak is detected during VOC transfer and cannot be repaired immediately (for example, by tightening a bolt or packing gland), then the transfer operation shall cease until the leak is repaired.(D) If a vapor leak is detected by sight, sound, smell, or hydrocarbon gas analyzer during the VOC loading operation, then a "first attempt" shall be made to repair the leak. VOC loading operations need not be ceased if the first attempt to repair the leak, as defined in § 101.1 of this title (relating to Definitions), to less than 10,000 parts per million by volume (ppmv) or 20% of the lower explosive limit, is not successful provided that the first attempt effort is documented by the owner or operator of the marine vessel as soon as practicable and a copy of the repair log made available to a representative of the marine terminal. No additional loadings shall be made into the cargo tank until a successful repair has been completed and an inspection conducted under 40 Code of Federal Regulations 61.304(f) or 63.565(c).(E) The intentional bypassing of a vapor control device during marine loading operations is prohibited.(F) All shore-based equipment is subject to the fugitive emissions monitoring requirements of §§ 115.352- 115.357 of this title. For the purposes of this paragraph, shore-based equipment includes, but is not limited to, all equipment such as loading arms, pumps, meters, shutoff valves, relief valves, and other piping and valves between the marine loading facility and the vapor control system and between the marine loading facility and the associated land-based storage tanks, excluding working emissions from the storage tanks.(G) Subparagraphs (B) and (D) of this paragraph do not apply to fumes from hatches or vents if the fumes result from: (i) a VOC transfer which is exempt from § 115.212(a)(6)(A) of this title under § 115.217(a)(5) of this title; or(ii) a VOC loading operation which, under the 90% control option in § 115.213(d) of this title, is not required to control vapors caused by loading VOC.(b) The owner or operator of each VOC transfer operation in the covered attainment counties shall comply with the following inspection requirements. (1) Land-based VOC transfer to or from transport vessels. At all VOC transfer operations in Aransas, Bexar, Calhoun, Gregg, Matagorda, Nueces, San Patricio, Travis, and Victoria Counties, and at gasoline terminals and gasoline bulk plants in the covered attainment counties: (A) During each VOC transfer, the owner or operator of the transfer operation or of the transport vessel shall inspect for:(i) visible liquid leaks;(B) VOC loading or unloading through the affected transfer lines shall be discontinued immediately when a leak is observed and shall not be resumed until the observed leak is repaired.(C) All tank-truck tanks being filled with or emptied of gasoline shall have been leak tested within one year in accordance with the requirements of §§ 115.234- 115.237 of this title as evidenced by prominently displayed certification affixed near the United States Department of Transportation certification plate.(D) Subparagraphs (A) and (B) of this paragraph do not apply to fumes from hatches or vents if the fumes result from: (i) a VOC transfer which is exempt from § 115.211 or § 115.212(b)(1) of this title under § 115.217(b) of this title; or(ii) a VOC loading operation which, under the 90% control option in § 115.213(c) of this title, is not required to control vapors caused by loading VOC.(2) Gasoline terminals-additional inspection. The owner or operator of each gasoline terminal shall perform a monthly leak inspection of all equipment in gasoline service. Each piece of equipment shall be inspected during the loading of gasoline tank-trucks. For this inspection, detection methods incorporating sight, sound, and smell are acceptable. Alternatively, a hydrocarbon gas analyzer may be used for the detection of leaks, by meeting the requirements of §§ 115.352- 115.357 of this title. Every reasonable effort shall be made to repair or replace a leaking component within 15 days after a leak is found. If the repair or replacement of a leaking component would require a unit shutdown, the repair may be delayed until the next scheduled shutdown.30 Tex. Admin. Code § 115.214
The provisions of this §115.214 adopted to be effective February 19, 1990, 15 TexReg 549; amended to be effective August 1, 1992, 17 TexReg 4683; amended to be effective December 3, 1993, 18 TexReg 8538; amended to be effective May 27, 1994, 19 TexReg 3703; amended to be effective June 16, 1995, 20 TexReg 4048; amended to be effective August 16, 1996, 21 TexReg 7557; amended to be effective May 22, 1997, 22 TexReg 4213; amended to be effective July 21, 1999, 24 TexReg 5488; amended to be effective May 16, 2002, 27 TexReg 4113