Statutes, codes, and regulations
Texas Administrative Code
Title 30 - ENVIRONMENTAL QUALITYPart 1 - TEXAS COMMISSION ON ENVIRONMENTAL QUALITYChapter 113 - STANDARDS OF PERFORMANCE FOR HAZARDOUS AIR POLLUTANTS AND FOR DESIGNATED FACILITIES AND POLLUTANTSSubchapter D - DESIGNATED FACILITIES AND POLLUTANTS
Division 5 - EMISSION GUIDELINES AND COMPLIANCE TIMES FOR OTHER SOLID WASTE INCINERATION UNITS THAT COMMENCED CONSTRUCTION ON OR BEFORE DECEMBER 9, 2004
Section 113.2320 - How do I demonstrate initial compliance with the emission limitations and establish the operating limits?

30 Tex. Admin. Code § 113.2320

Download
PDF
Current through Reg. 49, No. 44; November 1, 2024
Section 113.2320 - How do I demonstrate initial compliance with the emission limitations and establish the operating limits?

You must conduct an initial performance test, as required under 40 Code of Federal Regulations §60.8, to determine compliance with the emission limitations in Table 2 in § 113.2357 of this title (relating to Tables Relating to Division 5) and to establish operating limits using the procedure in § 113.2315 or § 113.2316 of this title (relating to What operating limits must I meet and by when? or What if I do not use a wet scrubber to comply with the emission limitations?). The initial performance test must be conducted using the test methods listed in Table 2 in § 113.2357 of this title and the procedures in § 113.2318 of this title (relating to How do I conduct the initial and annual performance test?).

30 Tex. Admin. Code § 113.2320

The provisions of this §113.2320 adopted to be effective May 14, 2009, 34 TexReg 2771