Section 61.1036 - School Facilities Standards for Construction before November 1, 2021(a) Definitions and procedures. The following words, terms, and procedures, when used in this section, shall have the following meanings, unless the context clearly indicates otherwise. (1) Architect--An individual registered as an architect under the Texas Occupations Code, Chapter 1051, and responsible for compliance with the architectural design requirements and all other applicable requirements of the Texas Occupations Code, Chapter 1051.(2) Educational program--A written document, developed and provided by the district, that includes the following information:(A) a summary of the school district's educational philosophy, mission, and goals; and(B) a description of the general nature of the district's instructional program in accordance with § 74.1 of this title (relating to Essential Knowledge and Skills). The written educational program should describe:(i) the learning activities to be housed, by instructional space;(ii) how the subject matter will be taught (methods of instructional delivery);(iii) the materials and equipment to be used and stored;(iv) utilities and infrastructure needs; and(v) the characteristics of furniture needed to support instruction.(3) Educational specifications--A written document for a proposed new school facility or major space renovation that includes a description of the proposed project, expressing the range of issues and alternatives. School districts that do not have personnel on staff with experience in developing educational specifications shall use the services of a design professional or consultant experienced in school planning and design to assist in the development of the educational specifications. The school district shall allow for input from teachers, other school campus staff, and district program staff in developing the educational specifications. The following information should be included in the educational specifications:(A) the instructional programs, grade configuration, and type of facility;(B) the spatial relationships--the desired relationships for the functions housed at the facility: (i) should be developed by the school district to support the district's instructional program;(ii) should identify functions that should be:(I) adjacent to, immediately accessible;(II) nearby, easily accessible; and(III) removed from or away from; and(iii) should relate to classroom/instructional functions, instructional support functions, building circulation, site activities/functions, and site circulation;(D) a list of any specialized classrooms or major support areas, noninstructional support areas, outdoor learning areas, outdoor science discovery centers, living science centers, or external activity spaces;(E) a schedule of the estimated number and approximate size of all instructional and instructional support spaces included in the facility;(F) estimated budget for the facility project;(G) school administrative organization;(H) provisions for outdoor instruction;(I) hours of operation that include the instructional day, extracurricular activities, and any public access or use;(J) the safety of students and staff in instructional programs, such as science and vocational instruction; and(K) the overall security of the facility.(4) Engineer--An individual registered as an engineer under the Texas Occupations Code, Chapter 1001, and responsible for compliance with the engineering design requirements and all other applicable requirements of the Texas Occupations Code, Chapter 1001.(5) Grade levels: (A) elementary school level--a school facility that includes some or all grades from prekindergarten through Grade 5 or Grade 6;(B) middle school level--a school facility that includes some or all grades from Grade 6 through Grade 8 or Grade 9, or a school facility that includes only Grade 6;(C) high school level--a school facility that includes some or all grades from Grade 9 or Grade 10 through Grade 12, or a school facility that includes only Grade 9; and(D) secondary school level--a school facility that includes some or all grades from Grade 6 through Grade 12.(6) Hazardous chemical--As defined by the Texas Health and Safety Code, Chapter 502, Hazard Communication Act.(7) Instructional space--General classrooms, specialized classrooms, outdoor learning areas, and major support areas.(8) Library--Library will include the following minimum requirements: (A) reading/instructional area;(B) reference/independent study area;(D) circulation desk/area;(E) computer/online reference areas; and(F) necessary ancillary areas, such as offices, workrooms, head-end room, and storage rooms.(9) Long-range school facility plan--School districts are encouraged to formulate a long-range facilities plan prior to making major capital investments. When formulating a plan, a school district's process should allow for input from teachers, students, parents, taxpayers, and other interested parties that reside within the school district. Major considerations should include:(A) a description of the current and future instructional program and instructional delivery issues;(B) the age, condition, and educational appropriateness of all buildings on the campus (in district), considering condition of all components and systems as well as design flexibility, including an estimate of cost to replace or refurbish and appropriate recommendations;(C) verification of the suitability of school site(s) for the intended use, considering size, shape, useable land, suitability for the planned improvements, and adequate vehicular and pedestrian access, queuing, parking, playgrounds and fields, etc.; and(D) a timeline and a series of recommendations to modify or supplement existing facilities to support the district's instructional program.(10) Major space renovations--Renovations to all or part of the facility's instructional space where the scope of the work in the affected part of the facility involves substantial renovations to the extent that most existing interior walls and fixtures are demolished and then subsequently rebuilt in a different configuration and/or function. Other renovations associated with repair or replacement of architectural interior or exterior finishes; fixtures; equipment; and electrical, plumbing, and mechanical systems are not subject to the requirements of subsections (d) and (e) of this section, but shall comply with applicable building codes as required by subsection (f) of this section.(11) Portable, modular building--An industrialized building as defined by the Texas Occupations Code, § 1202.003, or any other manufactured or site-built building that is capable of being relocated and is used as a school facility.(12) Square feet per student--The net square footage of a room divided by the maximum number of students to be housed in that room during any single class period.(13) Square feet per room measurements--The net square footage of a room includes exposed storage space, such as cabinets or shelving, but does not include hallway space, classroom door alcoves, or storage space, such as closets or preparation offices. The net square footage of a room shall be measured from the inside surfaces of the room's walls.(14) Abbreviations: (A) ANSI--American National Standards Institute;(B) ICC--International Code Council; and(C) NFPA--National Fire Protection Association.(b) Implementation date. The requirements for school facility standards shall apply to projects for new construction or major space renovations if:(1) a board of trustees adopts a fiscal year maintenance and operations budget where a capital improvement project title and a design or design and construction budget are delineated;(2) a board of trustees calls a bond election where one or more capital improvement project titles as well as design or design and construction budgets are delineated; or(3) a new contract or amendment to an existing contract for architectural services for new construction or a major renovation for a school facility project has been agreed to, and signed and dated by both parties to the agreement after January 1, 2004, and before November 1, 2021.(c) Certification of design and construction.(1) In this section, the word "certify" indicates that the architect or engineer has reviewed the standards contained in this chapter and used the best professional judgment and reasonable care consistent with the practice of architecture or engineering in the State of Texas in executing the construction documents. The architect or engineer also certifies that these documents conform to the provisions of this section, except as indicated on the certification.(2) The school district shall notify and obligate the architect or engineer to provide the required certification. The architect's or engineer's signature and seal on the construction documents shall certify compliance.(3) To ensure that facilities have been designed and constructed according to the provisions of this section, each of the involved parties shall execute responsibilities as follows. (A) The school district shall provide the architect or engineer the educational program and educational specifications approved by the board of trustees as required by this subchapter, and building code specifications for the facility. If a school district has a long-range school facility plan, it shall also be provided to the architect or engineer.(B) The architect or engineer shall perform a building code search under applicable regulations that may influence the project, and shall certify that the design has been researched before it is final.(C) The architect or engineer shall also certify that the facility has been designed according to the provisions of this section, based on the educational program, educational specifications, long-range school facility plan, building code specifications, and all documented changes to the construction documents provided by the district.(D) The building contractor or construction manager shall certify that the facility has been constructed in general accordance with the construction documents specified in subparagraph (C) of this paragraph. If the school district acts as general contractor, it shall make the certification required by this paragraph.(E) When construction is completed, the school district shall certify that the facility conforms to the design requirements specified in subparagraph (A) of this paragraph.(F) The certifications specified in subparagraphs (A)-(E) of this paragraph shall be gathered on the "Certification of Project Compliance" form developed by the Texas Education Agency (TEA). The school district will retain this form in its files indefinitely until review and/or submittal is required by representatives of the TEA.(d) Space, minimum square foot, and design requirements.(1) A school district shall provide instructional space if required by the district educational specifications described in subsection (e) of this section.(2) For each type of instructional space, a district shall satisfy the requirements of this section by using the standard for square feet per room specified in paragraph (5)(B)-(D) of this subsection. For school districts with facilities that have one or more classrooms with maximum class sizes that are normally less than 22 students at the elementary level and less than 25 students at the middle or high school level, the school districts may satisfy the requirements of this section for those classrooms by using the standard for the minimum square feet per student specified in paragraph (5)(B)-(D) of this subsection. These classrooms shall be designed on the basis of expected maximum class size, and not expected average class size. Upon submission by a district, alternate classroom designs with square feet per room measurements less than those specified in this subsection may be considered for approval by the TEA division responsible for state funding on a case-by-case basis.(3) School districts should consider providing extra square footage in classrooms where the use on a regular basis of multiple computers, large furniture, televisions, mobile laptop carts, mobile video conferencing carts, monitors on carts, or the like is anticipated. To improve circulation and usability of classroom space, school districts with class sizes that are normally larger than 25 students for Grades 5-12 should also consider increasing the minimum classroom size by adding the appropriate minimum square feet per student specified in paragraph (5)(B)-(D) of this subsection for each student in excess of 25.(4) Compliance with the standards specified in paragraph (5)(B)-(D) of this subsection will be evaluated based on the school district's intended full-time and/or part-time use of the areas, and not the name of the areas as identified in the construction documents.(5) Instructional area size and design requirements.(A) Design criteria. The school district shall provide the architect or engineer with all expected class sizes for the facilities, with the list of chemicals to be used in the science laboratories or science laboratory/classrooms, and with the number of computers anticipated in the library, so that the architect or engineer can adequately design the facilities to meet the criteria specified in subparagraphs (B)-(D) of this paragraph.(B) General classrooms.(i) Classrooms for prekindergarten-Grade 1 shall have a minimum of 800 square feet per room. School districts with small class sizes may have classrooms that provide a minimum of 36 square feet per student.(ii) Classrooms at the elementary school level for Grades 2 and up shall have a minimum of 700 square feet per room. School districts with small class sizes may have classrooms that provide a minimum of 32 square feet per student.(iii) Classrooms at the secondary school level shall have a minimum of 700 square feet per room. School districts with small class sizes may have classrooms that provide a minimum of 28 square feet per student.(C) Specialized classrooms.(i) A computer classroom used for the teaching of computer skills shall have a minimum of 900 square feet per room. The minimum room size is ideal for 25 students; 36 square feet per student should be added to the minimum square footage for each student in excess of 25. School districts with small class sizes may have computer classrooms that provide a minimum of 36 square feet per student. School districts should consider the heat output of computers when designing the ventilation system that serves a computer classroom.(ii) Computer laboratories that are not used regularly for scheduled instruction but that are intended to support other instructional areas shall have a minimum of 25 square feet per computer station. For computer laboratories where the use of portable computers, such as laptop computers, is anticipated, the size may be reduced to 20 square feet per computer station.(iii) The following provisions shall apply to combination science laboratories/classrooms, where each student has a lab station and where typically there is a clearly defined laboratory area and a clearly defined lecture area.(I) Combination science laboratories/classrooms shall have a minimum of 900 square feet per room at the elementary school level. The minimum room size is adequate for 22 students; 41 square feet per student shall be added to the minimum square footage for each student in excess of 22.(II) Combination science laboratories/classrooms shall have a minimum of 1,200 square feet per room at the middle school level. The minimum room size is adequate for 24 students; 50 square feet per student shall be added to the minimum square footage for each student in excess of 24.(III) Combination science laboratories/classrooms shall have a minimum of 1,400 square feet per room at the high school level. The minimum room size is adequate for 24 students; 58 square feet per student shall be added to the minimum square footage for each student in excess of 24.(IV) School districts with small class sizes may have combination science laboratories/classrooms that provide a minimum of 41 square feet per student but not less than 700 square feet total at the elementary school level, a minimum of 50 square feet per student but not less than 950 square feet total at the middle school level, and a minimum of 58 square feet per student but not less than 1,100 square feet total at the high school level.(iv) For districts that choose to use separate science classrooms and science laboratories, the following provisions shall apply.(I) A science classroom shall be a minimum of 700 square feet regardless of grade level served.(II) A science laboratory shall have a minimum of 800 square feet at the elementary school level. The minimum laboratory size is adequate for 22 students; 36 square feet per student shall be added to the minimum square footage for each student in excess of 22.(III) A science laboratory shall have a minimum of 900 square feet at the middle school level. The minimum laboratory size is adequate for 24 students; 38 square feet per student shall be added to the minimum square footage for each student in excess of 24.(IV) A science laboratory shall have a minimum of 1,000 square feet at the high school level. The minimum laboratory size is adequate for 24 students; 42 square feet per student shall be added to the minimum square footage for each student in excess of 24.(V) Science classrooms shall be provided at a ratio not to exceed 2:1 of science classrooms to science laboratories at the middle school and high school levels. The science laboratories shall be located convenient to the science classrooms they serve.(VI) School districts with small class sizes may have science classrooms that provide a minimum of 32 square feet per student, and they may have science laboratories that provide a minimum of 36 square feet per student but not less than 600 square feet total at the elementary school level, a minimum of 38 square feet per student but not less than 700 square feet total at the middle school level, and a minimum of 42 square feet per student but not less than 800 square feet total at the high school level.(v) If hazardous or vaporous chemicals are to be used in the science laboratories or science laboratories/classrooms, a separate chemical storage room shall be provided. The chemical storage room shall be separate from, and shall not be combined as part of, a preparation room or an equipment storage room; however, the chemical storage room may be located so that access is through a preparation room or equipment storage room. The chemical storage room shall be secure to prevent access to chemicals by students. One chemical storage room may be shared among multiple laboratories or laboratories/classrooms.(vi) Each school science laboratory, science classroom, science laboratory/classroom, science preparatory room, and chemical storage room shall include the following provisions. (I) A built-in fume hood shall be provided in each high school level chemistry or advanced placement chemistry laboratory or laboratory/classroom. A built-in fume hood should also be provided in each high school level integrated physics and chemistry laboratory or laboratory/classroom. The exhaust shall be vented to the outside above the roof and away from air vents.(II) A built-in eye/face wash that can wash both eyes simultaneously shall be provided in each room where hazardous chemicals are used by instructors and/or students. The eye/face wash shall comply with the ANSI Standards for Shower and Eyewash Equipment (Z358.1). The tepid water required by ANSI Z358.1 is not required to come from a heated source; however, school districts that commonly experience lengthy periods of extremely cold temperatures during the winter season should consider a tepid water system with a heated source.(III) A built-in safety shower shall be provided in each high school level chemistry or advanced placement chemistry laboratory or laboratory/classroom. A built-in safety shower should also be provided in each high school level integrated physics and chemistry laboratory or laboratory/classroom. The safety shower shall comply with the ANSI Standards for Shower and Eyewash Equipment (Z358.1). The tepid water required by ANSI Z358.1 is not required to come from a heated source; however, school districts that commonly experience lengthy periods of extremely cold temperatures during the winter season should consider a tepid water system with a heated source.(IV) Ventilation systems serving science rooms shall be designed and constructed so that under normal operation the return air from the science rooms is not recirculated into non-science areas. In the chemical storage rooms, a ventilation system shall exhaust the air to the outside, and shall not be recirculated back into the space.(V) An exhaust fan that is controlled by the instructor shall be provided in all rooms where hazardous or vaporous chemicals are to be used or stored. The exhaust fan shall be of sufficient size to exhaust the total volume of air in the room within 15 minutes. The exhaust shall be vented to the outside above the roof and away from air vents.(VI) A minimum of 6 linear feet of total horizontal workspace, such as lab stations, lab tables, countertops, desktops, or some combination of these, shall be provided for each student in each middle school and high school science laboratory and science laboratory/classroom.(VII) If electricity, gas, and/or water are provided in student areas, emergency shut-off controls shall be provided for each in a location accessible to the instructor but not easily accessible to students.(vii) Special education classrooms shall have a minimum of 400 square feet per room. School districts with small class sizes may have rooms that provide a minimum of 40 square feet per student.(viii) Specialized classrooms not otherwise identified within these standards shall at a minimum comply with the requirements specified in subparagraph (B) of this paragraph.(ix) Compliance with the standards specified in clauses (iii) and (iv) of this subparagraph will be evaluated based on the average class size in those classrooms.(D) Major support areas. (i) Primary gymnasiums or physical education space, if required by the district's educational program, shall have a minimum of 3,000 square feet at the elementary school level; 4,800 square feet at the middle school level; and 7,500 square feet at the high school level.(ii) A school district shall consider the School Library Standards and Guidelines as adopted under Texas Education Code, § 33.021, when developing, implementing, or expanding library services. Libraries for campuses with a planned student capacity of 100 or less shall be a minimum of 1,400 square feet. Libraries for campuses with a planned student capacity of 101 to 500 shall be a minimum of 1,400 square feet plus an additional 4.0 square feet for each student in excess of 100. Libraries for campuses with a planned student capacity of 501 to 2,000 shall be a minimum of 3,000 square feet plus an additional 3.0 square feet for each student in excess of 500. Libraries for campuses with a planned student capacity of 2,001 or more shall be a minimum of 7,500 square feet plus an additional 2.0 square feet for each student in excess of 2,000. A school district that plans to locate more than 12 student computers in the library shall add 25 square feet of space for each additional computer anticipated. The space allotments within the library shall be based on a formula of 30% for the reading/instructional area and reference/independent study area; 45% for the stack area, circulation desk/area, and computer/online reference areas; and 25% for the necessary ancillary areas. Windows shall be placed so that adequate wall and floor space remains to accommodate the shelving necessary for the library collection size established by the School Library Standards and Guidelines.(6) It is not the intent of these standards to limit the use of nontraditional, alternative, sustainable, and/or innovative school designs. A nontraditional design model is one that works to break down the scale of the school and to improve the connection of the student to the resources available within the school environment. If a school district chooses to use a nontraditional model, the following provisions shall apply. (A) The instructional spaces where teachers will instruct groups of students in specialized coursework shall meet the standard, as appropriate based on group size, for square feet per room or for the minimum square feet per student specified in paragraph (5)(C) of this subsection.(B) Large group lecture spaces that do not use tables or desks for the students shall have a minimum of 15 square feet per student. Large group lecture spaces that do use tables or desks for the students shall meet the standard, as appropriate based on group size, for square feet per room or for the minimum square feet per student specified in paragraph (5)(B) of this subsection. A minimum of 150 square feet shall be provided for each small group, conference, or office space area or room.(C) An individual student learning area that is assigned to a specific student shall have a minimum of 35 square feet. An individual student learning area that is not assigned to a specific student shall have a minimum of 25 square feet.(D) If necessary under the design model, up to half of the reading/reference area function of the library may be dispersed throughout the facility outside the normal library boundaries. The sum total square footage of all library-related areas shall meet the minimum square feet specified for libraries in paragraph (5)(D)(ii) of this subsection.(7) Other space requirements should be developed from school district design criteria as required to meet educational program needs.(e) Educational adequacy. A proposed new school facility or major space renovation of an existing school facility meets the conditions of educational adequacy if the design of the proposed project is based on the requirements of the school district's educational program, the educational specifications, and the student population that it serves.(f) Construction quality. (1) Districts with existing building codes. (A) A school district located in an area that has adopted local construction codes shall comply with those codes (including building, fire, plumbing, mechanical, fuel gas, energy conservation, and electrical codes). The school district is not required to seek additional plan review of school facilities projects other than what is required by the local building authority. If the local building authority does not require a plan review, then a qualified, independent third party, not employed by the design architect or engineer, shall review the plans and specifications for compliance with the requirements of the adopted building code. The plan review shall examine compliance conditions for emergency egress, fire protection, structural integrity, life safety, plumbing, energy conservation, and mechanical and electrical design. The review shall be conducted prior to the commencement of construction and must be conducted by a qualified building code consultant or a third party architect or engineer. A qualified building code consultant is a person who maintains, as a minimum, a current certification from the ICC. Associated fees shall be the responsibility of the school district. The reviewer shall prepare a summary list of any conditions not in conformance with the provisions of the adopted building code and is required to send a copy to the school district, design architect, or engineer. The design architect or engineer shall revise the plans and specifications as necessary and certify code compliance to the district. The reviewer, in his or her reasonable judgment and with the approval of the local building authority, may allow a limited number of variances from the codes if such variances do not negatively affect the quality or safety of the facility. Any disputes shall be a matter for contract resolution.(B) For school facilities projects subject to these standards, and where not otherwise required by local code, fire alarm systems shall be provided. Fire alarm systems shall be designed and installed in accordance with applicable portions of the latest edition of the International Building Code (IBC) and International Fire Code (IFC).(C) As part of their school facilities projects and where not otherwise required by local code, school districts should consider providing automatic sprinkler systems for fire protection, fire suppression, and life safety. In absence of a local code, each automatic sprinkler system shall be installed in accordance with the latest edition of the IBC and IFC.(D) If the local building authority does not conduct reviews and inspections during the course of construction of the facility, then a qualified, independent third party, not employed by the design architect or engineer or contractor, should perform a reasonable number of reviews and inspections during the course of construction for compliance with the requirements of the adopted building code. The reviews and inspections should examine compliance conditions for emergency egress, fire protection, structural integrity, life safety, plumbing, energy conservation, and mechanical and electrical design. A qualified code inspector is a person who maintains, as a minimum, a current certification from the ICC as a combination commercial inspector and commercial energy inspector.(2) Districts without existing building codes.(A) A school district located in an area that has not adopted local building codes shall adopt and use the building code and related fire, plumbing, mechanical, fuel gas, and energy conservation codes from the latest edition of the family of International Codes as published by the ICC; and the National Electric Code as published by the NFPA. As an alternative, a school district may adopt the building code and related fire, plumbing, mechanical, fuel gas, and energy conservation codes as adopted by a nearby municipality or county. A qualified, independent third party, not employed by the design architect or engineer, shall review the plans and specifications for compliance with the requirements of the adopted building code. The plan review shall examine compliance conditions for emergency egress, fire protection, structural integrity, life safety, plumbing, energy conservation, and mechanical and electrical design. The review shall be conducted prior to the commencement of construction and must be conducted by a qualified building code consultant or a third party architect or engineer. A qualified building code consultant is a person who maintains, as a minimum, a current certification from the ICC. Associated fees shall be the responsibility of the school district. The reviewer shall prepare a summary list of any conditions not in conformance with the provisions of the adopted building code and is required to send a copy to the school district, design architect, or engineer. The design architect or engineer shall revise the plans and specifications as necessary and certify code compliance to the district. The reviewer, in his or her reasonable judgment, may allow a limited number of variances from the codes if such variances do not negatively affect the quality or safety of the facility. Any disputes shall be a matter for contract resolution.(B) For school facilities projects subject to these standards, fire alarm systems shall be provided. Fire alarm systems shall be designed and installed in accordance with applicable portions of the latest edition of the IBC and IFC.(C) As part of their school facilities projects, school districts should consider providing automatic sprinkler systems for fire protection, fire suppression, and life safety. Each automatic sprinkler system shall be installed in accordance with the latest edition of the IBC and IFC.(D) A qualified, independent third party, not employed by the design architect or engineer or contractor, should perform a reasonable number of reviews and inspections during the course of construction of the facility for compliance with the requirements of the adopted building code. The reviews and inspections should examine compliance conditions for emergency egress, fire protection, structural integrity, life safety, plumbing, energy conservation, and mechanical and electrical design. A qualified code inspector is a person who maintains, as a minimum, a current certification from the ICC as a combination commercial inspector and commercial energy inspector.(3) Special provisions for portable, modular buildings. Any portable, modular building capable of being relocated that is purchased or leased for use as a school facility by a school district, whether that building is manufactured off-site or constructed on-site, must comply with all provisions of this section. Effective September 1, 2007, the following additional provisions shall apply to any portable, modular building that is purchased or leased for use as a school facility by a school district. (A) A school district located in an area that has adopted local construction codes shall have the portable, modular building, including the construction of the foundation system and the erection and installation of the building on the foundation, inspected by the local building authority for compliance with the mandatory building codes or approved designs, plans, and specifications. The school district is not required to seek additional inspection of the portable, modular building other than what is required by the local building authority. If the local building authority does not perform inspections, then a qualified, independent third party, not employed by the design architect, engineer, contractor, or manufacturer, shall inspect the facility, including the construction of the foundation system and the erection and installation of the facility on the foundation, for compliance with the mandatory building codes or approved designs, plans, and specifications. The inspections shall be performed within 30 days of the completion of the construction, erection, and installation of the facility on the site, and the school district shall not occupy or use the facility until the independent third party makes a final determination that the facility is in compliance with all provisions of this section. For a manufactured portable, modular building that is an industrialized building as defined by the Texas Occupations Code, § 1202.003, the factory inspection performed under the oversight of the Texas Department of Licensing and Regulation shall suffice to determine compliance of the building envelope with the mandatory building codes or approved designs, plans, and specifications in lieu of an inspection by the local building authority or an independent third party for a portable, modular building constructed on or after January 1, 1986; however, an inspection of the construction of the foundation system and the erection and installation of the portable, modular building on the foundation shall still be performed.(B) A school district located in an area that has not adopted local building codes shall have the portable, modular building, including the construction of the foundation system and the erection and installation of the building on the foundation, inspected by a qualified, independent third party, not employed by the design architect, engineer, contractor, or manufacturer, for compliance with the mandatory building codes or approved designs, plans, and specifications. The inspections shall be performed within 30 days of the completion of the construction, erection, and installation of the facility on the site, and the school district shall not occupy or use the facility until the independent third party makes a final determination that the facility is in compliance with all provisions of this section. For a manufactured portable, modular building that is an industrialized building as defined by the Texas Occupations Code, § 1202.003, the factory inspection performed under the oversight of the Texas Department of Licensing and Regulation shall suffice to determine compliance of the building envelope with the mandatory building codes or approved designs, plans, and specifications in lieu of an inspection by an independent third party for a portable, modular building constructed on or after January 1, 1986; however, an inspection of the construction of the foundation system and the erection and installation of the portable, modular building on the foundation shall still be performed.(C) A qualified, independent third party inspector is a person who maintains, as a minimum, a current certification from the ICC as a combination commercial inspector and commercial energy inspector.(D) A school district that has purchased or leased a portable, modular building for use as a school facility on or after September 1, 2007, and before the effective date of this section, shall have the inspections required by this subsection performed within 60 days of the effective date of this section; any items of noncompliance identified during the inspections shall be brought into compliance by the school district within 90 days of the date of the inspections.(4) Other provisions.(A) For school facilities projects subject to these standards, an adequate technology, electrical, and communications infrastructure shall be provided. To ensure the adequacy of the infrastructure, the school district and the architect or engineer shall seek the input of the school district staff, including, but not limited to, the technology director, the library director, the program directors, the maintenance director, and the campus staff, in the planning and design of the infrastructure.(B) As part of their school facilities projects, school districts should consider the use of designs, methods, and materials that will reduce the potential for indoor air quality problems. School districts should consult with a qualified indoor air quality specialist during the design process to ensure that the potential for indoor air quality problems after construction and occupancy of a facility is minimized. School districts should use the voluntary indoor air quality guidelines adopted by the Texas Department of State Health Services under the Texas Health and Safety Code, Chapter 385. School districts should also use the "Indoor Air Quality Tools for Schools" program administered by the U.S. Environmental Protection Agency.(C) As part of their school facilities projects, school districts should consider the use of sustainable school designs. A sustainable design is a design that minimizes a facility's impact on the environment through energy and resource efficiency.(D) School district facilities shall comply with the "Texas Accessibility Standards" as promulgated under the Texas Government Code, Chapter 469, Elimination of Architectural Barriers, as prepared and administered by the Texas Department of Licensing and Regulation.(E) School district facilities shall comply with the provisions of the Americans with Disabilities Act of 1990 (Title I and Title II).(F) School district facilities shall comply with all other local, state, and federal requirements as applicable.19 Tex. Admin. Code § 61.1036
The provisions of this §61.1036 adopted to be effective June 9, 2003, 28 TexReg 4420; amended to be effective September 24, 2008, 33 TexReg 8001; Amended by Texas Register, Volume 46, Number 41, October 8, 2021, TexReg 6920, eff. 10/12/2021