An air quality construction permit for a new major source or modification to a major source shall demonstrate to the department that the potential to emit from the new major source or modification to a major source may be issued only if it has been shown that the operation of the new major source or modification to a major source will not contribute to adverse impact on visibility in any mandatory Class I federal area. If air pollution dispersion modeling is required, the modeling shall be performed in accordance with the air quality modeling guidance in 40 C.F.R. Part 51, Appendix W (July 1, 2018) and is not affected by stack height that exceeds good engineering practice or by any other dispersion technique as defined in 40 C.F.R. § 51.100 (July 1, 2018).
S.D. Admin. R. 74:36:21:04
General Authority: SDCL 34A-1-6.
Law Implemented: SDCL 34A-1-6.