S.D. Admin. R. 74:36:20:05
A construction permit for a new source or modification to an existing source may be issued only if it has been shown that the operation of the new source or modification to an existing source will not prevent or interfere with the attainment or maintenance of an applicable national ambient air quality standard. If air pollution dispersion modeling is required, the modeling shall be performed in accordance with the air quality modeling guidance in 40 C.F.R. Part 51, Appendix W (July 1, 2018) and is not affected by stack height that exceeds good engineering practice or by any other dispersion technique as defined in 40 C.F.R. § 51.100 (July 1, 2018). Each new source or modification to an existing source must comply with emission limits and other requirements of the act and the Clean Air Act. The construction permit must include reasonable conditions, including adherence to plans and specifications, to ensure compliance with the act, the Clean Air Act, and any other conditions justified under SDCL 34A-1-19.
S.D. Admin. R. 74:36:20:05
General Authority: SDCL 34A-1-6, 34A-1-19, 34A-1-21.
Law Implemented: SDCL 34A-1-21.