S.D. Admin. R. 74:36:08:119

Current through Register Vol. 51, page 67, December 16, 2024

Section 74:36:08:119 - National emission standards for nine metal fabrication and finishing area sources

The national emission standards for nine fabrication and finishing area sources are those in 40 C.F.R. § 63, Subpart XXXXXX (July 1, 2018). A source that operates a unit subject to Subpart XXXXXX is exempt from the obligation to obtain a Part 70 operating permit if the source is not required to obtain a Part 70 operating permit for a reason other than the source is subject to Subpart XXXXXX. Exempted sources must still meet the applicable requirements in Subpart XXXXXX.

S.D. Admin. R. 74:36:08:119

36 SDR 207, effective 6/28/2010; 39 SDR 219, effective 6/25/2013; 42 SDR 52, effective 10/13/2015; 44 SDR 43, effective 9/13/2017; 46 SDR 064, effective 11/25/2019

General Authority: SDCL 34A-1-6.

Law Implemented: SDCL 34A-1-18.