S.D. Admin. R. 74:27:14:02

Current through Register Vol. 51, page 67, December 16, 2024

Section 74:27:14:02 - Design and construction

Incineration facilities subject to this chapter must comply with the applicable design requirements of §§ 74:27:12:02 to 74:27:12:04, inclusive; 74:27:12:06; 74:27:12:08 to 74:27:12:14, inclusive; and the following:

(1) Incinerator design must be adequate for the types of waste proposed to be processed at the facility and must meet all requirements of articles 74:35 and 74:36;

(2) Air pollution control equipment must meet all applicable requirements of articles 74:35 and 74:36;

(3) Special waste storage area designs must have the approval of the secretary through the permitting process;

(4) Ash storage area design must have the approval of the secretary through the permitting process and be sized to contain the maximum volume of ash estimated to be in storage at any one time;

(5) An ash management plan outlining the ash handling procedures at the facility must be submitted to the secretary for approval. It shall, at a minimum, include:

(a) Estimated volume of ash generated annually and over the life of the facility;

(b) Estimated maximum volume of ash requiring storage at any one time;

(c) Projected constituents of the ash;

(d) Proposed testing plans for the ash, including the sampling parameters and a justification of the parameters, sampling frequency, and sampling methods, including quality control;

(e) Proposed methods of handling ash, including storage methods, transportation methods, disposal methods, and frequency of disposal;

(6) On-site ash disposal facilities must meet the applicable requirements of chapters 74:27:12 and 74:27:13; and

(7) Wastewater discharges must meet the requirements of chapters 74:52:01 to 74:52:11, inclusive.

S.D. Admin. R. 74:27:14:02

17 SDR 8, effective 7/26/1990; 19 SDR 186, effective 6/10/1993.

General Authority: SDCL 34A-6-1.6.

Law Implemented: SDCL 34A-6-1.6.