Chapter 74:12:07 - Enhanced recovery and underground injection
- Section 74:12:07:01 - Requirements for injection well application and modifications
- Section 74:12:07:02 - Time to apply
- Section 74:12:07:03 - Application requirements
- Section 74:12:07:04 - Applicant for permit to inject to notify other operators
- Section 74:12:07:05 - Duration of permit to inject
- Section 74:12:07:06 - Transfer of permit to inject
- Section 74:12:07:07 - Termination of permit to inject
- Section 74:12:07:08 - Major modifications
- Section 74:12:07:09 - Minor modifications
- Section 74:12:07:10 - Casing and cementing of injection wells
- Section 74:12:07:11 - Notice of commencement and discontinuance of injection operations
- Section 74:12:07:12 - Monitoring of injected fluids
- Section 74:12:07:13 - Injection project records
- Section 74:12:07:14 - Retention of records
- Section 74:12:07:15 - Inspection and monitoring of injection project
- Section 74:12:07:16 - Reporting of mechanical problems, well failures, or malfunctions of the injection system
- Section 74:12:07:17 - Injection prohibited
- Section 74:12:07:18 - Demonstration of mechanical integrity required
- Section 74:12:07:19 - Notice of lack of mechanical integrity
- Section 74:12:07:20 - Correction of adverse effects required
- Section 74:12:07:21 - Secretary to set maximum injection pressure
- Section 74:12:07:22 - Secretary to set maximum injection volume
- Section 74:12:07:23 - Injection well drilling requirements
- Section 74:12:07:24 - Designation of exempted aquifer