Chapter 74:12:02 - Drilling
- Section 74:12:02:01 - Requirements to drill, deepen, or reenter for oil or gas
- Section 74:12:02:02 - Requirements to drill a directional or horizontal well
- Section 74:12:02:03 - Failure to commence drilling cancels permit - Extensions
- Section 74:12:02:04 - Minimum spacing of oil wells
- Section 74:12:02:05 - Minimum spacing of gas wells
- Section 74:12:02:06 - Spacing of wells after discovery of oil or gas
- Section 74:12:02:07 - Dissolution of abandoned oil or gas fields
- Section 74:12:02:08 - Secretary authorized to approve exception location
- Section 74:12:02:09 - Identification sign required at each well
- Section 74:12:02:10 - Pit construction and reclamation
- Section 74:12:02:11 - Oil, gas, and water strata required to be sealed
- Section 74:12:02:12 - Procedures for setting surface casing and production casing
- Section 74:12:02:13 - Operators to seal off or plug wells with defective casings or cement
- Section 74:12:02:14 - Blowout prevention equipment required
- Section 74:12:02:15 - Vertical deviation test
- Section 74:12:02:16 - Wellhead pressure testing equipment
- Section 74:12:02:17 - Well logs, completion/recompletion reports, and sundry notice reports to be filed with secretary
- Section 74:12:02:18 - Cores and samples required to be sent to the state geologist
- Section 74:12:02:19 - Hydraulic fracturing reporting requirements