S.D. Admin. R. 74:02:09:10
Current through Register Vol. 51, page 67, December 16, 2024
The inspection port shall be located on the pipeline between the irrigation pump and the irrigation pipeline check valve, as illustrated in Appendix A at the end of the chapter. The vacuum relief valve connection may serve as the inspection port.
The inspection port or viewing device shall be situated in such a manner that the inlet to the low-pressure drain can be observed. A minimum four-inch orifice or viewing area is required.
S.D. Admin. R. 74:02:09:10
General Authority: SDCL 34A-2A-3.
Law Implemented: SDCL 34A-2A-3.