S.D. Admin. R. 74:02:04:57

Current through Register Vol. 51, page 67, December 16, 2024

Section 74:02:04:57 - Minimum hole size for grouting

When grouting is required, the drill hole size must be large enough to allow the casing with centralizers to be pressure grouted from the top of the producing formation up to the bottom of a pitless unit or adapter or to the ground surface.

S.D. Admin. R. 74:02:04:57

12 SDR 50, effective 9/29/1985; 13 SDR 129, 13 SDR 141, effective 7/1/1987.

General Authority: SDCL 46-2-5, 46-6-20, 46-6-27.

Law Implemented: SDCL 46-6-6.1, 46-6-10, 46-6-20, 46-6-27.