S.D. Admin. R. 61:08:05:31

Current through Register Vol. 51, page 67, December 16, 2024

Section 61:08:05:31 - Pressure gauges required on low pressure side of reducing valves

A pressure gauge shall be installed on the low pressure side of the reducing valve. The pressure gauge shall be mounted on a siphon tube (pigtail) no less than one-fourth inch in diameter.

S.D. Admin. R. 61:08:05:31

SL 1975, ch 16, § 1; 8 SDR 87, 8 SDR 134, effective 7/1/1982; 12 SDR 151, 12 SDR 155, effective 7/1/1986.

General Authority: SDCL 34-29A-16.

Law Implemented: SDCL 34-29A-24.