S.D. Admin. R. 50:02:04:06

Current through Register Vol. 51, page 67, December 16, 2024

Section 50:02:04:06 - Technical standards

The technical standards for a PSAP shall be as follows:

(1) Enhanced 911, as defined in SDCL 34-45-1, requires a PSAP to receive the following specific information from each of the following classes of telecommunication services:

(a) From wireless and VoIP callers: The PSAP must receive the caller's call back phone number, the class of service code of the calling phone, the billing name on the account, the physical address of the phone and the community name where the phone is located as maintained by the providing telecommunications company, the pilot number, the emergency service number (ESN) code for the caller's location, the telephone companies provider code, the PSAP code where the call is to be routed and answered, and the responding law enforcement, fire, and emergency medical services agency for the caller's location; and

(b) From a wireless caller: For a Phase 2 call, the PSAP must receive the call back number for the wireless phone, the class of service code, the emergency service routing key (ESRK) number, the name of the wireless company handling the call, the physical address of the cell site handling the call, the community name where the cell site is located, the wireless ESN number for the PSAP the call is being routed to, the wireless provider's company code, and the latitude and longitude of the wireless caller's handset; and

(2) A PSAP must maintain current, up-to-date mapping of its service area and have the ability to use longitude to plot coordinates for responders.

S.D. Admin. R. 50:02:04:06

36 SDR 100, effective 12/14/2009; 40 SDR 39, effective 9/9/2013.

General Authority: SDCL 34-45-18.2.

Law Implemented: SDCL 34-45-1, 34-45-18.2.