S.D. Admin. R. 20:10:39:28
Current through Register Vol. 51, page 67, December 16, 2024
The selection of cow contact points to be tested shall include a sufficient number of locations reasonably likely to demonstrate the presence of stray voltage or current, if any. The voltage across the shunt resistor or current through the shunt resistor is measured between cow contact points. The source resistance is calculated during analysis for all cow contact points.
S.D. Admin. R. 20:10:39:28
General Authority: SDCL 49-47-2.
Law Implemented: SDCL 49-47-2, 49-47-3.