S.D. Admin. R. 20:10:39:07

Current through Register Vol. 51, page 67, December 16, 2024

Section 20:10:39:07 - Qualified testing professional

Measuring and testing for stray current or stray voltage shall be performed by a qualified testing professional. The following persons are presumed to be qualified testing professionals:

(1) A professional engineer, licensed in any state, who has completed no fewer than 48 hours of commission-approved stray voltage training and who has been involved in no fewer than 5 prior investigations involving the measurement or testing of stray current or stray voltage;

(2) An electrician holding an electrical contractor's license, master electrician's license, or equivalent, in any state, who has completed no fewer than 48 40 hours of commission-approved stray current or stray voltage training and who has been involved in no fewer than 5 prior investigations involving the measurement or testing of stray current or stray voltage; or

(3) A technician who, under the supervision of a person presumed qualified under subdivision 20:10:39:07(1) or (2), who has completed no fewer than 8 hours of commission-approved stray current or stray voltage training and has been involved in no fewer than 5 prior investigations involving the measurement or testing of stray current or stray voltage.

The commission shall establish and update a list of commission-approved stray current and stray voltage training programs.

S.D. Admin. R. 20:10:39:07

42 SDR 174, effective 6/21/2016; 47 SDR 125, effective 5/30/2021

General Authority: SDCL 49-47-2.

Law Implemented: SDCL 49-47-2, 49-47-3.