Current through Register Vol. 48, No. 11, November 22, 2024
Section 8-628 - Recertifying(1) Modular buildings, originally constructed, certified and labeled in accordance with the act and these regulations, may be recertified and relabeled if all of the following conditions are met. (a) the original manufacturer must hold a current license issued in accordance with the act and these regulations; and(b) the original certification label(s) must be attached to the building and be in good, legible condition; and(c) the building must be returned to the original manufacturing facility; and(d) the building must be certified by an approved inspection agency as meeting all requirements of the building codes in effect and recognized by the Council at the time of recertification; and(e) the manufacturer must install a new data plate on the building while at the manufacturing facility; and(f) the approved inspection agency must install a new certification label on the building while at the manufacturing facility; and(g) the manufacturer must pay the fee for recertification and purchase a new certification label; and(h) the approved inspection agency must be present and witness the installation of the new certification label issued by the Council while at the manufacturing facility.Added by State Register Volume 32, Issue No. 6, eff June 27, 2008; State Register Volume 37, Issue No. 5, eff May 24, 2013; State Register Volume 48, Issue No. 05, eff. 5/24/2024.