S.C. Code Regs. § § 8-609

Current through Register Vol. 48, No. 11, November 22, 2024

Section 8-609 - Change in Status, Alterations

(1) Changes to approved plans.

(a) If the manufacturer proposes to change any portion of its system or model designs, or if the Council regulations are amended to necessitate such change, it shall be required to submit to the Council, through its approved inspection agency; one electronic copy of detailed, supplemental plans. Plans shall be accompanied by a transmittal of supplementary plan application form, obtainable from the Council and the appropriate plan filing fee.

(b) A model name or designation may be changed or added prior to the expiration date by filing an amended application.

(c) If the manufacturer proposes changes in the quality control manual or procedures, one electronic copy of the changes shall be submitted to the Council through the approved inspection agency.

(2) Change of name, address, or ownership. In the event of a change of name, address, or ownership of a modular building manufacturer, the owner, or an officer shall notify the Council in writing within ten (10) days of such change.

(3) Discontinuance of manufacturer. When a manufacturer discontinues an approved model, the manufacturer shall, within ten (10) days, advise the Council of the date of the discontinuance and return all certification labels allocated to the model.

(4) Existing model approvals. In the event of amendment of these regulations or the building codes referenced herein, which will require changes to an approved model design, the Council shall notify the manufacturer of such changes, and shall allow the manufacturer ninety (90) days from the date of such notification, or such additional time as the Council shall deem reasonable, in which to submit revised plans for model approval.

(5) Revised model plans submitted pursuant to this section shall be processed as a supplemental detail, with appropriate fees.

(6) Alteration or conversion. Any unauthorized alteration or conversation made to an approved modular building prior to initial erection shall void the approval. The state certification label(s) affixed to the building shall be returned to or be confiscated by the Council.

(7) Any alteration or conversion made to an approved modular building after initial erection shall void the approval and certification label, and, be subject to the provisions of the building inspection program for the jurisdiction in which it is located.

S.C. Code Regs. § 8-609

Added by State Register Volume 32, Issue No. 6, eff June 27, 2008; State Register Volume 37, Issue No. 5, eff May 24, 2013; State Register Volume 48, Issue No. 05, eff. 5/24/2024.