Current through Register Vol. 54, No. 49, December 7, 2024
Section 5.14 - Inspection and testing by the Department(a)Inspections generally. The Department may evaluate the performance of a certified UPC/PLU inspector who conducts inspections for a private certification program by conducting a follow-up inspection of any UPC scanning system or PLU device that has been inspected and tested by the certified UPC/PLU inspector.(b)Time lapse and other factors effecting results. In evaluating the inspection and testing performed by a certified UPC/PLU inspector as described in subsection (a), the Department will consider any factor that might reasonably account for a variance between the Department's inspection results and those of the certified UPC/PLU inspector, including a lapse of time between an inspection performed by the Department and the inspection performed by the certified UPC/PLU inspector.(c)Reporting of results. Within 30 days following a follow-up inspection, the Department will mail the certified UPC/PLU inspector written notice of the Department's inspection and the results of that inspection.(d)Use of results. The Department may use the results of its follow-up inspection to suspend or revoke a UPC/PLU inspector's certificate, as described in subsection (a), in accordance with § 5.15 (relating to suspension or revocation of certification), or as the basis for a warning or instruction directed to the certified UPC/PLU inspector. This section cited in 70 Pa. Code § 5.15 (relating to suspension or revocation of certification).