Current through Register Vol. 54, No. 49, December 7, 2024
Section 10.7 - Certificate of approval(a)Content of certificate. A certificate of approval issued by the Department under this chapter will contain the following: (1) The name and address of the person to whom it is issued.(2) A description of the type of approved weighing and measuring device.(3) A reference to the requirement that approved weighing and measuring devices be clearly marked for purposes of identification with the name, initials or trademark of the manufacturer and with the manufacturer's designation which positively identifies the pattern or design of the device. This provision does not apply when a waiver is obtained from the Department in accordance with section 4174 of the act (relating to marking of approved weights and measures).(4) The date of issuance of the certificate.(5) Other information deemed relevant by the Department for inclusion in the certificate.(b)Effect of issuance of certificate. The issuance of a certificate of approval by the Department with respect to a type of weighing and measuring device confirms that the type meets the standards for device type approval in Subchapter D of the act (relating to device type approval) and this chapter, and is not a guarantee or verification of the correctness of any individual weight or measure belonging to that type.