Current through Register Vol. 54, No. 45, November 9, 2024
Section 212.406 - Channelizing devices(a)Device consistency. Channelizing devices used to form a particular taper or a particular longitudinal line of devices must all be of a single type. For example, cones, drums, barricades and vertical panels may not be intermixed within the same taper or line, but the type of device being used in a taper may differ from the type of device being used in a longitudinal section.(b)Cones. Cones may only be used as a channelizing device for operations where work is in active progress. The minimum height of cones is 28 inches except cones that are 18 inches high may be used to protect new pavement markings.