Pa. Code tit. 67, pt. I, subpt. A, art. VII, ch. 175, subch. O, TABLE IX
ADDITIONAL GLAZING INFORMATION
NOTES: -Table below is an appendix in ANSI Glazing Standard Z26.1
-Glazing marked AS10 or AS11 has bullet resisting qualities.
-Acceptable numbers shown in the two columns to the right, are marked on the glass
and are preceded by the letter "AS"
ADDITIONAL GLAZING INFORMATION
MOTORCYCLES
| Glazing Material Applicable When Marked with "AS" Designation Indicated Below At Levels Requisite for Driving Visibility | At Levels Not Requisite for Driving Visibility | |
| MOTORCYCLES | ||
| Windscreens | 1*, 6, 10*, 11 | 1, 6, 7, 10, 11 |
*Glazing material which is intentionally made so that only a portion of a single sheet has a luminous transmittance of not less than 70 percent shall be marked at the edge of the sheet to show the limits of the area that may be used at levels requisite for driving visibility. The marks A S1 or A S2 etc., shall be used with the arrow pointing to the portion of the sheet having a luminous transmittance of not less than 70 percent and the number indicating the item with which that portion of the sheet complies.
Pa. Code tit. 67, pt. I, subpt. A, art. VII, ch. 175, subch. O, TABLE IX