Current through Register Vol. 54, No. 45, November 9, 2024
Section 185.131 - Requirements of finished track; electrical appliancesTo conduct a race meeting under a license issued by the Commission, the association shall at all times maintain a finished race track which meets the following requirements of the Commission. The association shall:
(1) File with the Commission a certificate of a duly licensed civil engineer or land surveyor that he has measured the said track from wire to wire, 3 feet out from the pole or inside hub rail thereof and certifying in linear feet the result of such measurement.(2) Prior to the commencement of each meeting, file with the Commission a certificate signed by a licensed civil engineer or land surveyor that he has surveyed the turns of the association's track and finds them to be no less than the requirements prescribed by the Commission.(3) Maintain sufficient and adequate equipment and competent personnel for the purpose of continued maintenance of the race course and plant grounds. Plant grounds shall at all times be maintained in a proper and safe condition.(4) Maintain an electrical wiring system of the quality intended to prevent electrical fires.(5) Prevent the use of electrical appliances or equipment by anyone in circuits located particularly in stable areas where such use does or could overload the circuit.