Current through Register Vol. 54, No. 45, November 9, 2024
Section 18.12 - Application and accompanying documents(a) The application for a permit shall be accompanied by the submission of plans, specifications, designer's report and other data which may be needed to enable the Department to determine compliance with its requirements.(b) Drawings, specifications and the report of the designer submitted as part of the application shall be prepared by or under the supervision of a registered professional engineer or registered architect legally qualified to practice in this Commonwealth.(c) The front cover or flyleaf of each set of drawings, of each copy of the designer's report, and of the specifications submitted shall bear the signature and the imprint of the seal of the registered engineer or architect by or under whom prepared. Each drawing shall bear an imprint or a legal facsimile of the seal.The provisions of this §18.12 adopted September 18, 1971, effective 9/18/1971, 1 Pa.B. 1921. This section cited in 28 Pa. Code § 18.14 (relating to guidelines).