Current through Register Vol. 54, No.43, October 26, 2024
Section 271.122 - Form of application(a) An application for a permit under this article shall be submitted to the Department, in writing, on forms provided by the Department.(b) An application for a permit shall be accompanied by information, maps, plans, specifications, designs, analyses, test reports and other data as may be required by the Department to determine compliance with this article.(c) Information in the application shall be current, presented clearly and concisely and supported by appropriate references to technical and other written material available to the Department.(d) An application for a permit shall be prepared by or under the supervision of a Pennsylvania registered professional engineer. The design section of the application shall bear the seal of a Pennsylvania registered professional engineer. The soils, geology and groundwater sections of a permit application shall be completed by experts in the fields of soil science, soil engineering, geology and groundwater. The geology and groundwater sections of a permit application also shall be completed under the supervision of a registered professional geologist licensed in Pennsylvania.(e) To the greatest extent feasible, a permit application shall be submitted to the Department on paper that is manufactured partly or entirely from postconsumer material.The provisions of this §271.122 adopted April 8, 1988, effective 4/9/1988, 18 Pa.B. 1681; amended October 9, 1992, effective 10/10/1992, 22 Pa.B. 5105; amended December 22, 2000, effective 12/23/2000, 30 Pa.B. 6685.