Current through Register Vol. 54, No.43, October 26, 2024
Section 266b.4 - Applicability-oil-based finishes(a) In addition to the requirements incorporated by reference in 40 CFR Part 273 (relating to standards for universal waste management), this chapter applies to persons managing oil-based finishes as defined in § 266b.3 (relating to definitions), except those listed in subsection (b).(b) This section does not apply to persons managing the following oil-based finishes:(1) Oil-based finishes that are not yet wastes under Chapter 261a (relating to identification and listing of hazardous waste). Subsections (c) and (d) describe when oil-based finishes become wastes.(2) Oil-based finishes that are not hazardous waste. An oil-based finish is a hazardous waste if it exhibits one or more of the characteristics identified in 40 CFR Part 261 , Subpart C (relating to characteristics of hazardous waste).(c) Used oil-based finishes become a waste on the date they are discarded or sent for reclamation.(d) Unused oil-based finishes become a waste on the date the handler discards them.The provisions of this §266b.4 adopted January 9, 2009, effective 1/10/2009, 39 Pa.B. 201.The provisions of this §266b.4 adopted under sections 105, 402 and 501 of the Solid Waste Management Act (35 P. S. §§ 6018.105, 6018.402 and 6018.501); sections 303 and 305(e)(2) of the Hazardous Sites Cleanup Act (35 P. S. §§ 6020.303 and 6020.305(e)(2)); section 5, 402 and 501 of The Clean Streams Law (35 P. S. §§ 691.5, 691.402 and 691.501); and section 1920-A of The Administrative Code of 1929 (71 P. S. §§ 510-20).