Current through Register Vol. 54, No.43, October 26, 2024
Section 240.143 - Adding or removing devices from certification(a) To add or remove a device from laboratory or testing certification, the certified individual shall submit a written and signed request to the Department.(b) The certified individual who analyzes each continuous monitor and electret reader shall provide in the request the specific serial number and proof of current calibration of each device to be added.(c) The certified individual who analyzes each continuous monitor and electret reader shall provide in the request the specific serial number of each device to be removed.(d) The device will be considered Department-listed or removed on the effective date stated in the Department's confirmation letter to the certified individual.(e) After the effective removal date of the device, the device may no longer be used to conduct radon testing activities or laboratory analysis.(f) The certified individual shall receive written approval from the Department to add a specific device prior to performing radon testing activities or laboratory analysis with the device.The provisions of this §240.143 adopted October 26, 2018, effective 1/24/2019, 48 Pa.B. 6791.The provisions of this §240.143 issued under sections 12 and 13 of the Radon Certification Act (63 P.S. §§ 2012 and 2013); section 302 of the Radiation Protection Act (35 P.S. § 7110.302); and section 1920-A of the Administrative Code (71 P.S. § 510.20).