Table 1-Waste Oil Not Exceeding Any Specification Level Is Not Subject To This Chapter When Burned For Energy Recovery.1
Constituent/Property | Allowable Levels |
Arsenic | 5 ppm maximum |
Cadmium | 2 ppm maximum |
Chromium | 10 ppm maximum |
Lead | 100 ppm maximum |
Flash point | 100°F minimum |
Total halogens | 1,000 ppm maximum for residential and commercial uses and 4,000 maximum for industrial uses. |
1 The specifications do not apply to mixtures of waste oil and hazardous waste that continue to be regulated as hazardous waste (see § 298.10(b) (relating to applicability).
25 Pa. Code § 298.11
This section cited in 25 Pa. Code § 261a.6 (relating to requirements for recyclable materials); 25 Pa. Code § 298.1 (relating to definitions); 25 Pa. Code § 298.10 (relating to applicability); 25 Pa. Code § 298.20 (relating to applicability); 25 Pa. Code § 298.40 (relating to applicability); 25 Pa. Code § 298.50 (relating to applicability); 25 Pa. Code § 298.60 (relating to applicability); 25 Pa. Code § 298.70 (relating to applicability); 25 Pa. Code § 298.72 (relating to on-specification waste oil fuel); and 25 Pa. Code § 298.74 (relating to tracking).