Current through Register Vol. 54, No. 45, November 9, 2024
Section 109.1006 - Design and construction standards(a)Application of standards. Standards in this section apply to design and construction or modification of bottled water and vended water systems, retail water facilities and bulk water hauling systems regardless of whether a Department permit or permit amendment is required. The standards apply to new facilities and facility modifications unless otherwise specifically indicated.(b)Acceptable design. Bottled water and vended water systems, retail water facilities and bulk water hauling systems shall be designed to provide an adequate quality of water to the public. The design shall ensure that the system will, upon completion, be capable of providing water that complies with the primary and secondary MCLs, MRDLs and treatment techniques established in § 109.1002 (relating to MCLs, MRDLs or treatment techniques). The Department may approve control techniques, such as nonremoval processes, which abate the problems associated with a secondary contaminant, and achieve the objective of the secondary MCL. (1) Designs of bottled water and vended water systems, retail water facilities and bulk water hauling systems shall conform to accepted standards of engineering and design in the water supply, bottled water, retail water or bulk water hauling industry, as applicable.(2) Designs of bottled water and vended water systems, retail water facilities and bulk water hauling systems shall be in accordance with Subchapter F (relating to design and construction standards) except that § 109.607 (relating to pressures) does not apply.The provisions of this §109.1006 adopted May 15, 1992, effective 5/16/1992, 22 Pa.B. 2621; amended July 20, 2001, effective 7/21/2001, 31 Pa.B. 3895. This section cited in 25 Pa. Code § 109.1005 (relating to permit requirements).