Or. Admin. Code § 741-110-0060

Current through Register Vol. 63, No. 12, December 1, 2024

Section 741-110-0060 - Required Installation of Specified Protective Devices

Unless otherwise ordered by the Department, the following protective devices shall be installed at the grade crossings described below.

(1) One railroad STOP sign shall be installed, where physical circumstances permit, on each track approach to each crossing equipped with Flashing-light signals, Cantilevered Flashing-light signals, Pedestrian Flashing-light signals, and automatic gates when the minimum signal activation requirement of OAR 741 110-0070(1) cannot be met.

(2) Two Number of Tracks (R15-2P) plaques shall be installed at each grade crossing consisting of two or more tracks.

(3) Stop Clearance Lines. One stop clearance line shall be installed on each paved roadway approach lane at each grade crossing.

(4) Grade Crossing Advance Warning Signs. Appropriate grade crossing advance warning signs shall be installed on each roadway approach to each grade crossing.

(5) Grade Crossing Pavement Markings. Grade crossing pavement markings shall be installed on each paved vehicle approach lane to each grade crossing.

(6) Guardrail or Curb. Guardrail or curb, as appropriate, shall be installed at each crossing equipped with active protective devices.

Or. Admin. Code § 741-110-0060

PUC 3-1983, f. & ef. 3-16-83 (Order No. 83-143); RS 2-1996, f. & cert. ef. 3-14-96; Renumbered from 860-042-0080; RD 3-2003 f. 9-18-03, cert. ef. 10-1-03; RD 1-2009, f. & cert. ef. 2-20-09; RD 1-2013, f. & cert. ef. 10-15-13

Stat. Auth.: ORS 184.616, 184.619, 823.011, 824.202 & 824.220

Stats. Implemented: ORS 824.202