Or. Admin. Code § 340-256-0550

Current through Register Vol. 63, No. 12, December 1, 2024

Section 340-256-0550 - Approved Retrofit Technology labeling requirements

(1) The Person who owns or to whom the Medium- or Heavy-duty Truck is registered must ensure each Medium- or Heavy-duty Truck containing Approved Retrofit Technology has a legible and durable label that complies with subsection (3) of this rule affixed to a conspicuous location on the engine or engine compartment and affixed to the Approved Retrofit Technology so that it can be easily read with the naked eye during daylight with or without the assistance of artificial lighting or reflective devices.

(2) No Person may remove, modify, alter, or tamper with a label in any way after it is installed.

(3) At a minimum, the label shall include the following:

(a) A unique identification number to be matched to the specific Approved Retrofit Technology family name;

(b) The Approved Retrofit Technology's manufacture name, address, and phone number;

(c) The Approved Retrofit Technology's serial number;

(d) The month and year the Approved Retrofit Technology was manufactured;

(e) The direction of the exhaust flow in the Approved Retrofit Technology; and

(f) The Approved Retrofit Technology's family name assigned by the installer of Approved Retrofit Technology in the following format: CA or US/MMM/YYYY/BART#/APP/XXXXX, where:

(A) CA designates a retrofit device that appears or previously appeared on the Currently Verified Diesel Emission Control Strategy of CARB or that appears or previously appeared on the Currently Verified Diesel Emission Control Strategy of CARB and that appears or previously appeared Verified Technologies List for Clean Diesel of EPA;

(B) US designates a retrofit device that appears or previously appeared Verified Technologies List for Clean Diesel of EPA and that does not appear or has not previously appeared the Currently Verified Diesel Emission Control Strategy of CARB;

(C) MMM designates and is to be replaced by the manufacturer code. For a retrofit device that appears or previously appeared on the Currently Verified Diesel Emission Control Strategy of CARB, MMM shall be replaced by the manufacturer code assigned by CARB's Executive Officer;

(D) MMM shall be replaced by three zeroes (000) for a retrofit device that appears or previously appeared Verified Technologies List for Clean Diesel of EPA; and

(E) YYYY designates and is to be replaced by the year of verification.

Or. Admin. Code § 340-256-0550

DEQ 11-2021, adopt filed 07/23/2021, effective 7/23/2021

Statutory/Other Authority: ORS 468A.810, ORS 468A.360 & ORS 468.020

Statutes/Other Implemented: ORS 468A.810 & ORS 468A.350-468A.400