Okla. Admin. Code § 35:37-7-1

Current through Vol. 42, No. 8, January 2, 2025

Section 35:37-7-1 - Submission of plans

(a) Two (2) sets of drawings with separate specification sheets that fully and clearly illustrate and describe the applicant's plans for constructing and equipping the plant for inspection shall be submitted to: Oklahoma Department of Agriculture, Food, & Forestry, Food Safety Division, Meat Inspection Services, P.O. Box 528804, Oklahoma City, Oklahoma 73152-8804. Submission of drawings is required for a new plant and for changing or modifying an existing plant. Plans should be reviewed and given an initial approval by the District or Circuit Supervisor prior to submission to the Oklahoma City office for final approval. The appropriate District or Circuit Supervisor shall be identified when the applicant makes initial contact with the Oklahoma City office.

(b) The name and address of the applicant shall be shown on each sheet of drawings. Prints or drawings shall not exceed 34 by 44 inches.

(c) Lines on the drawings shall be sharp and clear and all writing shall be legible.

(d) The required specification sheets which accompany the drawings shall identify such features as the finish of the floors, walls, and ceilings; the source of the water supply; method of sewage disposal; method of controlling rodents and vermin; description of the trapping and venting of drainage lines; description of the hot water system, means to dispel steam and vapor in work rooms; screens for other openings to prevent admittance of flies; and other important features. The specifications should be typewritten on 8 1/2 by 11 inch sheets and organized into sets.

Okla. Admin. Code § 35:37-7-1

Added at 21 Ok Reg 1181, eff 5-27-04

Amended by Oklahoma Register, Volume 34, Issue 24, September 1, 2017, eff. 9/11/2017