Current through Vol. 42, No. 4, November 1, 2024
Section 35:10-5-4 - Device Categories(a) Device Category 1 shall include scales which fall into class I and/or II, whether designated by the manufacturer or not, pursuant to "Handbook 44" Section S.5.2. The minimum equipment necessary to service Category 1 scales shall be certified standards in amounts suitable to test devices in the category as specified in the most recently published edition of "Handbook 44" and the National Conference on Weights and Measures "(NCWM) Publication 12" Examination Procedures Outline (EPO's) For Weighing and Measuring Devices.(b) Device Category 2 shall include scales which fall into class III, III L and/or IIII, whether designated by the manufacturer or not, pursuant to "Handbook 44". The minimum equipment necessary to service Category 2 scales shall be certified standards in amounts suitable to test device in said category as specified in the most recently published edition of Handbook 44 and NCWM Pub. 12 EPO's.(c) Device Category 3 shall include moisture meters. The minimum equipment necessary to service moisture meters shall be certified standards in amounts suitable to test devices in the category as specified in the most recently published edition of the "Handbook 44". If offical grain samples are used to check meters, the grain sample moisture content must be determined by the oven test method referenced in the "Federal Grain Inspection Service (FGIS) Moisture Handbook," supplements, and revisions.)Okla. Admin. Code § 35:10-5-4
Added at 10 Ok Reg 2563, eff 6-25-93; Amended at 17 Ok Reg 1016, eff 5-11-00