Current through Vol. 42, No. 4, November 1, 2024
Section 35:10-5-2 - Application(a) A Service Technician is an individual who applies and is approved for a license as qualified by training and/or experience to service any or all categories of commercial weighing and/or measuring device. Application for a license shall be made on a form supplied by the Department. This form, duly signed, shall certify that the applicant: (1) Is fully qualified to service devices of all categories for which license is sought;(2) Will use and has in possession all necessary testing equipment and tandards;(3) Has full knowledge of all appropriate weights and measures laws, orders, rules, and regulations; and(4) Has in possession a copy of the most recently published edition of "Handbook 44", The Oklahoma Weights and Measures Law, The Oklahoma Service Technician and Service Agency Act, associated rules, and regulations.(b) A Service Agency is a qualified company which applies and is approved for a license to service any or all categories. The application form, duly signed by an authorized officer of the service agency shall certify that the applicant: (1) Is fully qualified to service devices of all categories for which license is sought;(2) Will use and has in possession, all necessary testing equipment and standards;(3) Has full knowledge of all appropriate weights and measures laws, orders, rules, and regulations.(4) Has in possession a copy of the most recently published edition of "Handbook 44", The Oklahoma Weights and Measures Law, The Oklahoma Service Technician and Service Agency Act, associated rules, and regulations.(5) Will attach for approval by the Department a seal which must include as a minimum the following information:(A) The Service Agency name, city, state, zip code, area code and phone number in a prominent location in the top one-third of the seal.(B) The statement "TESTED IN ACCORDANCE WITH THE PROVISIONS IN HANDBOOK 44 AND IS SUITABLE FOR USE AS A COMMERCIAL DEVICE" in the second one-third of the seal.(C) A place for the Service Technician's signature, Service Technician's license number and date of service in the bottom one-third of the seal.Okla. Admin. Code § 35:10-5-2
Added at 10 Ok Reg 2563, eff 6-25-93; Amended at 17 Ok Reg 1016, eff 5-11-00