Okla. Admin. Code § 25:35-3-1

Current through Vol. 42, No. 4, November 1, 2024

Section 25:35-3-1 - Marking of anemometer towers

Marking as required by this chapter shall include marking the anemometer tower, guy wires, and accessory facilities as follows:

(1) The entire anemometer tower shall be painted in seven equal, alternating bands of aviation orange and white, beginning with orange at the top of the tower and with orange at the bottom of the tower.

(2) Two marker balls shall be attached to and evenly spaced on each of the outside guy wires.

(3) One seven-foot safety sleeve shall be placed at each anchor point and shall extend from the anchor point along each guy wire attached to the anchor point with a second sleeve attached to the outer guy wire.

Okla. Admin. Code § 25:35-3-1

Adopted by Oklahoma Register, Volume 32, Issue 23, August 17, 2015, eff. 8/27/2015