Section 3745-20-10 - Standards for asbestos mills and manufacturing(A) This rule applies to asbestos mills and to the following manufacturing operations using commercial asbestos: (1) Cloth, cord, wicks, tubing, tape, twine, rope, thread, yarn, roving, lap, or other textile materials.(3) Fireproofing and insulating materials.(5) Paper, millboard, and felt.(7) Paints, coatings, caulks, adhesives, and sealants.(8) Plastics and rubber materials.(9) Chlorine utilizing asbestos diaphragm technology.(B) Each owner or operator of an asbestos mill or any of the asbestos manufacturing operations to which this rule applies shall perform at least one of the following: (1) Not cause or permit any visible emissions to the outside air from these operations or from any building or structure in which they are conducted or from any other fugitive sources.(2) Use the methods specified by rule 3745-20-12 of the Administrative Code to clean emissions from these operations containing particulate asbestos material before any emissions escape to, or are vented to, the outside air.(3) Monitor each potential source of asbestos emissions from any part of the manufacturing facility, including air cleaning devices, process equipment, and buildings housing material processing and handling equipment, at least once on each day of operation, during daylight hours for visible emissions to the outside air during periods of operation. The monitoring shall be by visual observation of at least fifteen seconds duration per source of emissions.(4) Inspect each air cleaning device at least once each week for proper operation and for changes that signal the potential for malfunctions to the maximum extent possible without dismantling other than opening the device, including the presence of tears, holes, and abrasions in filter bags and for dust deposits on the clean side of bags. For air cleaning devices that cannot be inspected on a weekly basis according to this paragraph, submit to the Ohio EPA field office, and revise as necessary, a written maintenance plan to include, at a minimum, the following: (a) Maintenance schedule.(5) Maintain records of the results of visible emission monitoring and air cleaning device inspections using a form with the following information:(a) Date and time of each inspection.(b) Presence or absence of visible emissions.(c) Condition of fabric filters, including presence of any tears, holes and abrasions.(d) Presence of dust deposits on clean side of fabric filters.(e) Brief description of corrective actions taken, including date and time.(f) Daily hours of operation for each air cleaning device.(6) Furnish upon request, and make available at the affected facility during normal business hours for inspection by the director or the director's representative, all records required under this rule.(7) Retain a copy of all monitoring and inspection records for at least two years.(8) Submit semiannually, by the thirtieth day following the end of the six-month period, a copy of the visible emission monitoring records to the Ohio EPA field office if visible emissions occurred during the report period. Ohio Admin. Code 3745-20-10
Effective: 7/8/2024
Five Year Review (FYR) Dates: 3/14/2024 and 03/14/2029
Promulgated Under: 119.03
Statutory Authority: 3704.03(E)
Rule Amplifies: 3704.03(A), 3704.03(E)
Prior Effective Dates: 11/18/2002, 02/02/2007, 03/02/2012, 04/08/2018