Section 60-03-01-11 - Storage and transportation of bulk pesticides1. Transporting and storing bulk pesticides must comply with the manufacturer's requirements.2. Transporting bulk pesticides must comply with all applicable state and United States department of transportation rules and regulations.3. A bulk pesticide storage container must be made of materials approved by the registrant and so constructed to be compatible with the pesticide stored and the conditions of storage, including any specifications that may appear on the pesticide label and labeling. The commissioner may approve or require materials other than those approved by the registrant.4. A bulk storage container and loading areas must be constructed and located on a site in a manner so that pesticides will not contaminate the environment, such as streams and water supplies.5. A permanent bulk storage container must be equipped with a locking withdrawal valve or must be stored in a secure locked area. The valves or storage area must be locked during nonbusiness hours or while unattended.6. A bulk pesticide storage container that is going to be refilled with a different pesticide must be cleaned and rinsed according to both the facility's and manufacturer's agreed-upon written instructions and all former labeling must be removed.N.D. Admin Code 60-03-01-11
Effective March 1, 2003; amended effective July 1, 2004; January 1, 2013.General Authority: NDCC 4-35-06
Law Implemented: NDCC 4-35-06, 4-35-15