Section 33.1-14-05-21 - Steam pressure gauge1. Each steam boiler must have a steam gauge, with dial range not less than one and one-half times the pressure at which the safety valve is set, connected to the steam space or to the steam connection to the water column. The steam gauge must be connected to a siphon or equivalent device of sufficient capacity to keep the gauge tube filled with water and so arranged that the gauge cannot be shut off from the boiler except by a cock placed near the gauge and provided with a tee or lever handle arranged to be parallel to the pipe in which it is located when the cock is open.2. When a steam pressure gauge connection longer than eight feet [2.44 meters] becomes necessary, a shutoff valve may be used near the boiler provided the valve is of the outside-screw-and-yoke type and is locked open. The line must be ample size with provision for free blowing. Each boiler must be provided with a one-quarter inch [6.35 millimeter] nipple and globe valve connected to the steam space for the exclusive purpose of attaching a test gauge when the boiler is in service so that the accuracy of the boiler steam gauge may be ascertained.N.D. Admin Code 33.1-14-05-21
Adopted by Administrative Rules Supplement 2020-377, July 2020, effective 7/1/2020.General Authority: NDCC 23.1-16
Law Implemented: NDCC 23.1-16