21 N.C. Admin. Code 6F.0101

Current through Register Vol. 39, No. 11, December 2, 2024

Section 06F .0101 - PHYSICAL STRUCTURE

(a) For the purpose of this Rule, "practical area" means the area of the school where barbering services are provided.

(b) The physical structure of barber schools in North Carolina shall conform to the following criteria:

(1) be a minimum of 14 linear feet wide;

(2) be equipped with a minimum of five barber chairs for barber schools within jail or prison facilities or 10 barber chairs for all other schools, and these chairs shall meet the sanitary conditions required by G.S. 86A-15(a)(2);

(3) have a minimum of 896 square feet in the practical area;

(4) have an additional 70 square feet in the practical area for each additional barber chair over 10 chairs;

(5) have at least five linear feet of space between each chair, center to center;

(6) have no more than two students enrolled per barber chair;

(7) be equipped with toilet facilities with hand-washing sink or basin;

(8) have concrete or wood floors covered with smooth, nonporous materials;

(9) have instructional materials, such as blackboard space or slide programs;

(10) have a workstand, with a mounted mirror with minimum dimensions of 36 inches tall and 20 inches wide, for each barber chair in the practical area, constructed of material that can be washed and cleansed;

(11) have the solutions and containers required by G.S. 86A-15(a)(2)(a) located at the workstand identified in Subparagraph (b)(10) of this Rule;

(12) have a tool cabinet for each barber chair, with a door to limit exposure of the tools to the open air;

(13) have a towel cabinet, or other method of storage, so that clean towels are stored separate from used towels;

(14) have at least one functional sink or lavatory, with hot and cold water, for each two barber chairs, located within seven unobstructed linear feet of each barber chair. This sink distance requirement does not apply to schools permitted on or before September 1, 2009;

(15) have the school separate from any other place or type of business, except for a business allowed by G.S. 86A-15(a)(1)(b), by a wall of ceiling height;

(16) have a classroom area, separate from the practical area, with desk chairs sufficient to serve the number of students enrolled, and a desk and chair for the instructors;

(17) have a means for electronic recordation of student hours;

(18) have a sign displayed in each practical area of the school stating that all barbering services are performed by students; and

(19) have a bulletin board hanging in each classroom area with a posting of the rules in this Subchapter and the minimum school curricula as set forth in 21 NCAC 06F .0120.

This Paragraph applies to barber schools permitted on or after December 1, 1994 or which undergo structural renovations after that date, except as specified in Paragraph (b)(14) of this Rule.

(c) All barber schools seeking a new permit shall receive a satisfactory building inspection by the jurisdiction having authority prior to obtaining a shop inspection pursuant to 21 NCAC 06L .0105.

21 N.C. Admin. Code 06F .0101

Authority G.S. 86A-5; 86A-13; 86A-15; 86A-22;
Eff. February 1, 1976;
Readopted Eff. February 8, 1978;
Amended Eff. September 1, 2013; October 1, 2009; June 1, 2008; December 1, 1994; May 1, 1989;
Readopted Eff. July 1, 2016;
Amended Eff. April 1, 2022; August 1, 2018.

Authority G.S. 86A-15; 86A-22;
Eff. February 1, 1976;
Readopted Eff. February 8, 1978;
Amended Eff. May 1, 1989;December 1, 1994;June 1, 2008; October 1, 2009; September 1, 2013;

Readopted by North Carolina Register Volume 31, Issue 03, August 1, 2016 effective 7/1/2016.

Amended by North Carolina Register Volume 33, Issue 05, September 1, 2018 effective 8/1/2018.

Amended by North Carolina Register Volume 36, Issue 21, May 2, 2022 effective 4/1/2022.