15A N.C. Admin. Code 2D.0918

Current through Register Vol. 39, No. 9, November 1, 2024

Section 02D .0918 - CAN COATING

(a) For the purpose of this Rule, the following definitions shall apply:

(1) "End sealing compound" means a synthetic rubber compound that is coated onto can ends and functions as a gasket when the end is assembled on the can.

(2) "Exterior base coating" means a coating applied to the exterior of a can to provide exterior protection to the metal and to provide background for the lithographic or printing operation.

(3) "Interior base coating" means a coating applied by roller coater or spray to the interior of a can to provide a protective lining between the can metal and product.

(4) "Interior body spray" means a coating sprayed on the interior of the can body to provide a protective film between the product and the can.

(5) "Overvarnish" means a coating applied directly over ink to reduce the coefficient of friction, to provide gloss, and to protect the finish against abrasion and corrosion.

(6) "Three-piece can side-seam spray" means a coating sprayed on the exterior and interior of a welded, cemented, or soldered seam to protect the exposed metal.

(7) "Two-piece can exterior end coating" means a coating applied by roller coating or spraying to the exterior end of a can to provide protection to the metal.

(b) This Rule applies to volatile organic compound emissions from coating applicators and ovens of sheet, can, or end coating lines involved in sheet exterior and interior basecoat and overvarnish; two-piece can interior body spray; two-piece spray or roll coat can exterior; and three-piece can side-seam spray and end sealing compound operations.

(c) Unless the exception in Paragraph (d) of this Rule applies, emissions of volatile organic compounds from any can coating line subject to this Rule shall not exceed:

(1) 4.5 pounds of volatile organic compounds per gallon of solids delivered to the coating applicator from sheet exterior and interior basecoat and overvarnish or two-piece can exterior basecoat and overvarnish operations;

(2) 9.8 pounds of volatile organic compounds per gallon of solids delivered to the coating applicator from two and three-piece can interior body spray and two-piece spray or roll coat can exterior end operations;

(3) 21.8 pounds of volatile organic compounds per gallon of solids delivered to the coating applicator from a three-piece can side seam spray operation; or

(4) 7.4 pounds of volatile organic compounds per gallon of solids delivered to the coating applicator from end sealing compound operations.

(d) Any source that has controlled emissions pursuant to 15A NCAC 02D .0518(e) prior to July 1, 2000 and that has installed air pollution control equipment in accordance with an air quality permit pursuant to 15A NCAC 02Q .0300 or 02Q .0500 in order to comply with this Rule before December 1, 1989 may comply with the limits contained in this Paragraph instead of those contained in Paragraph (c) of this Rule. Emissions of volatile organic compounds from any can coating line subject to this Paragraph shall not exceed:

(1) 2.8 pounds of volatile organic compounds per gallon of coating, excluding water and exempt compounds, delivered to the coating applicator from sheet exterior and interior basecoat and overvarnish or two-piece can exterior basecoat and overvarnish operations;

(2) 4.2 pounds of volatile organic compounds per gallon of coating, excluding water and exempt compounds, delivered to the coating applicator from two and three-piece can interior body spray and two-piece can spray or roll coat exterior end operations;

(3) 5.5 pounds of volatile organic compounds per gallon of coating, excluding water and exempt compounds, delivered to the coating applicator from a three-piece can side-seam spray operation; or

(4) 3.7 pounds of volatile organic compounds per gallon of coating, excluding water and exempt compounds, delivered to the coating applicator from end sealing compound operations.

15A N.C. Admin. Code 02D .0918

Authority G.S. 143-215.3(a)(1); 143-215.107(a)(5);
Eff. July 1, 1979;
Amended Eff. July 1, 1996; July 1, 1991; December 1, 1989; January 1, 1985;
Readopted Eff. November 1, 2020.

Authority G.S. 143-215.3(a)(1); 143-215.107(a)(5);
Eff. 7/1/1979;
Amended Eff. 7/1/1996; July 1, 1991; December 1, 1989; January 1, 1985.

Readopted by North Carolina Register Volume 35, Issue 11, December 1, 2020 effective 11/1/2020.

Amended by North Carolina Register Volume 38, Issue 11, December 1, 2023 effective 11/1/2023.