N.Y. Comp. Codes R. & Regs. tit. 6, ch. X, Appendices, app 29
(cf. Subpart 373-3)
EXAMPLES OF POTENTIALLY INCOMPATIBLE WASTE
Many hazardous wastes, when mixed with other waste or materials at a hazardous waste facility, can produce effects which are harmful to human health and the environment, such as (1) heat or pressure, (2) fire or explosion, (3) violent reaction, (4) toxic dusts, mists, fumes or gases, or (5) flammable fumes or gases.
Below are examples of potentially incompatible wastes, waste components, and materials, along with the harmful consequences which result from mixing materials in one group with materials in another group. The list is intended as a guide to owners or operators of treatment, storage and disposal facilities, and to enforcement and permit-granting officials, to indicate the need for special precautions when managing these potentially incompatible waste materials or components.
This list is not intended to be exhaustive. An owner or operator must, as the regulation requires, adequately analyze his wastes so that he can avoid creating uncontrolled substances or reactions of the type listed below, whether they are listed below or not.
It is possible for potentially incompatible wastes to be mixed in a way that precludes a reaction (e.g,adding acid to water rather than water to acid) or that neutralizes them (e.g., a strong acid mixed with a strong base), or that controls substances produced (e.g., by generating flammable gases in a closed tank equipped so that ignition cannot occur, and burning the gases in an incinerator).
In the lists below, the mixing of a Group A material with a Group B material may have the potential consequence as noted.
| Group 1-A | Group 1-B |
| Acetylene sludge | Acid sludge |
| Alkaline caustic liquids | Acid and water |
| Alkaline cleaner | Battery acid |
| Alkaline corrosive liquids | Chemical cleaners |
| Alkaline corrosive battery fluid | Electrolyte, acid |
| Caustic waste water | Etching acid liquid or solvent |
| Lime sludge and other corrosive alkalies | Pickling liquor and other corrosive acids |
| Lime waste water | Spent acid |
| Lime and water | Spent mixed acid |
| Spent caustic | Spent sulfuric acid |
| Potential consequences: Heat generation; violent reaction. | |
| Group 2-A | Group 2-B |
| Aluminum | Any waste in Group 1-A or 1-B |
| Beryllium | |
| Calcium | |
| Lithium | |
| Magnesium | |
| Potassium | |
| Sodium | |
| Zinc powder | |
| Other reactive metals and metal hydrides | |
| Potential consequences: Fire or explosion; generation of flammable hydrogen gas. | |
| Group 3-A | Group 3-B |
| Alcohols | Any concentrated waste in Group 1-A or 1-B |
| Water | Calcium |
| Lithium | |
| Metal hydrides | |
| Potassium | |
| SO2Cl2SOCl2PCl3CH3SiCl 3 | |
| Other water reactive waste | |
| Potential consequences: Fire, explosion, or heat generation; generation of flammable or toxic gases. | |
| Group 4-A | Group 4-B |
| Alcohols | Concentrated Group 1-A or 1-B wastes |
| Aldehydes | |
| Halogenated hydrocarbons | Group 2-A wastes |
| Nitrated hydrocarbons | |
| Unsaturated hydrocarbons | |
| Other reactive organic components and solvents | |
| Potential consequences: Fire, explosion, or violent reaction. | |
| Group 5-A | Group 5-B |
| Spent cyanide and sulfide solutions | Group 1-B wastes |
| Potential consequences: Generation of toxic hydrogen cyanide or hydrogen sulfide gas. | |
| Group 6-A | Group 6-B |
| Chlorates | Acetic acid and other organic acids |
| Chlorine | |
| Chlorites | Concentrated mineral acids |
| Chromic acid | |
| Hydrochlorites | Group 2-A wastes |
| Nitrates | Group 4-A wastes |
| Nitric acid, fuming | Other flammable and combustible wastes |
| Perchlorates | |
| Permanganates | |
| Peroxides | |
| Other strong oxidizers | |
| Potential consequences: Fire, explosion, or violent reaction. | |
| Source: Law, Regulations and Guidelines for Handling of Hazardous Waste, California Department of Health, February 1975. | |
N.Y. Comp. Codes R. & Regs. tit. 6, ch. X, Appendices, app 29