Current through Register Vol. 46, No. 50, December 11, 2024
Section 598-1.16 - ReferencesCitations used in this Part refer to the publications listed in this section. These publications are available for inspection at the Department of Environmental Conservation, 625 Broadway, Albany, NY 12233-7020. Copies may be purchased directly from the publisher at the address shown.
(a) API 620 means American Petroleum Institute Specification 620, 'Recommended Rules for Design and Construction of Large, Welded, Low-Pressure Storage Tanks', June 1990, American Petroleum Institute, 200 Washington Avenue, NW, Washington, DC 20001-5571.(b) API 650 means American Petroleum Institute Specification 650, 'Welded Steel Tanks for Oil Storage', 9th Edition, 1993, American Petroleum Institute, 200 Washington Avenue, NW, Washington, DC 20001-5571.(c) API 651 means American Petroleum Institute Specification 651, Cathodic Protection of Above-ground Petroleum Storage Tanks, 1991, American Petroleum Institute, 200 Washington Avenue, NW, Washington, DC 20001-5571.(d) API 652 means American Petroleum Institute Specification 652, Lining of Aboveground Petroleum Storage Tank Bottoms, 1991, American Petroleum Institute, 200 Washington Avenue, NW, Washington, DC 20001-5571.(e) API 1615 means American Petroleum Institute Specification 1615, Installation of Underground Petroleum Storage Systems, 1987, with 1989 supplement, American Petroleum Institute, 200 Washington Avenue, NW, Washington, DC 20001-5571.(f) API RP 1631, June 2010 means American Petroleum Institute Specification 1631, Interior Lining and Periodic Inspection of Underground Storage Tanks, 5th edition, June 2001, American Petroleum Institute, 200 Washington Avenue, NW, Washington, DC 20001-5571.(g) API 1632 means American Petroleum Institute Specification 1632, Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems, 1987, American Petroleum Institute, 200 Washington Avenue, NW, Washington, DC 20001-5571.(h) API RP 2200, September 2010 means American Petroleum Institute Specification 2200, Repairing Crude Oil, Liquefied Petroleum Gas, and Product Pipelines, 4th edition, September 2010, American Petroleum Institute, 200 Washington Avenue, NW, Washington, DC 20001-5571.(i) ASTM D2996-88 means American Society for Testing and Materials Designation D2996-88, Specification for Filament-Wound Reinforced Thermosetting Resin Pipe, 1988, American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.(j) ASTM D3299-88 means American Society for Testing and Materials Designation D3299-88, Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Chemical-Resistant Tanks, 1988, American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.(k) ASTM D4021-92 means American Society for Testing and Materials Designation D4021-92, Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks, 1992, American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (l) ASTM D4097-88 means American Society for Testing and Materials Designation D4097-88, Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Chemical-Resistant Tanks, 1988, American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.(m) CAN4-S601-M84 means Underwriters' Laboratories of Canada, No. CAN4-S601-M84, Standard for Shop Fabricated Steel Aboveground Horizontal Tanks for Flammable and Combustible Liquids, 1984, Underwriters' Laboratories of Canada, 7 Underwriters Road, Scarborough, Ontario, Canada M1R5P8.(n) CAN4-S630-M84 means Underwriters' Laboratories of Canada, No. CAN4-S630-M84, Standard for Shop Fabricated Steel Aboveground Vertical Tanks for Flammable and Combustible Liquids, 1984, Underwriters Laboratories of Canada, 7 Underwriters Road, Scarborough, Ontario, Canada M1R5P8.(o) FTPI RP T-95-02, January 1995 means Fiberglass Tank and Pipe Institute (FTPI), Remanufacturing of Fiberglass Reinforced Plastic (FRP) Underground Storage Tanks, 2nd edition, January 1995, 8252 S. Harvard Avenue, Suite 1-2, Tulsa, OK 74137(p) NACE SP0169-2013, 2013 means Association of Materials Protection and Performance, formerly National Association of Corrosion Engineers, Control of External Corrosion on Underground or Submerged Metallic Piping Systems, 2013 edition, Association of Materials Protection and Performance, 15835 Park Ten Place, Houston, TX 77084.(q) NACE SP0285-2011, means Association of Materials Protection and Performance, formerly National Association of Corrosion Engineers, Corrosion Control of Underground Storage Tanks by Cathodic Protection, 2011 edition (formerly RP0285), Association of Materials Protection and Performance, 15835 Park Ten Place, Houston, TX 77084.(r) NACE Standard RP-01-69 means Association of Materials Protection and Performance, formerly National Association of Corrosion Engineers, Recommended Practice - Control of External Corrosion on Underground or Submerged Metallic Piping Systems, RP-01-69, April 1992 Revision, Association of Materials Protection and Performance, 15835 Park Ten Place, Houston, TX 77084. (s) NACE Standard RP-02-85 means Association of Materials Protection and Performance, formerly National Association of Corrosion Engineers, Recommended Practice - Control of External Corrosion on Metallic Buried, Partially Buried, or Submerged Liquid Storage Systems, 1985, Association of Materials Protection and Performance, 15835 Park Ten Place, Houston, TX 77084.(t) NACE TM0101-2012, 2012 means Association of Materials Protection and Performance, formerly National Association of Corrosion Engineers, Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems, 2012 edition, Association of Materials Protection and Performance, 15835 Park Ten Place, Houston, TX 77084. (u) NACE TM0497-2012, 2012 means Association of Materials Protection and Performance, formerly National Association of Corrosion Engineers, Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems, 2012 edition, Association of Materials Protection and Performance, 15835 Park Ten Place, Houston, TX 77084.(v) NFPA 30, 1993 means National Fire Protection Association, Flammable and Combustible Liquids Code, No. 30, 1993, NFPA, Batterymarch Park, Quincy, MA 02269.(w) NFPA 30, 2012 means National Fire Protection Association, Flammable and Combustible Liquids Code 2012 edition, NFPA, Batterymarch Park, Quincy, MA 02269.(x) NFPA 326, 2010 means National Fire Protection Association, Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair, 2010 edition, NFPA, Batterymarch Park, Quincy, MA 02269.(y) NLPA 631 means National Leak Prevention Association, Spill Prevention, Minimum 10-Year Life Extension of Existing Steel Underground Storage Tanks by Lining Without the Addition of Cathodic Protection, 1991, NLPA P.O. Box 1643, Boise, ID 83701.(z) PEI RP900, 2021 means Petroleum Equipment Institute (PEI), UST Inspection and Maintenance, 2017 edition, Petroleum Equipment Institute (PEI) P. O. Box 2380, Tulsa, OK 74101-2380.(aa) PEI RP1200, 2019 means Petroleum Equipment Institute (PEI), Testing and Verification of Spill, Overfill, Leak Detection and Secondary Containment Equipment at UST Facilities, 2019 edition, Petroleum Equipment Institute (PEI) P. O. Box 2380, Tulsa, OK 74101-2380.(ab) SSPC-SP #6 means Association of Materials Protection and Performance, formerly Steel Structures Painting Council, Steel Structures Painting Manual, Chapter 2'Surface Preparation Specifications, Commercial Blast Cleaning, June 1991, Association of Materials Protection and Performance, 800 Trumbull Drive, Pittsburgh, PA 15205.(ac) STI R051, January 2006 means Cathodic Protection Testing Procedures for sti-P3® USTs, revised January 2006, Steel Tank Institute, 944 Donata Court, Lake Zurich, IL 60047.(ad) STI R972, December 2010 means Steel Tank Institute, Recommended Practice for the Addition of Supplemental Anodes to sti-P3® USTs, revised December 2010, Steel Tank Institute, 944 Donata Court, Lake Zurich, IL 60047.(ae) ULC-C107.7-1993 means Underwriters' Laboratories of Canada, No. ULC-C107, Glass Fiber Reinforced Plastic Pipe and Fittings for Flammable Liquids, 1993, Underwriters' Laboratories of Canada, 7 Underwriters Road, Scarborough, Ontario, Canada M1R5P8.(af) ULC Standard S603 means Underwriters' Laboratories of Canada, No. ULC-S603-92, Standard for Steel Underground Tanks for Flammable and Combustible Liquids, 1992, Underwriters Laboratories of Canada, 7 Underwriters Road, Scarborough, Ontario, Canada M1R5P8.(ag) ULC-S603.1 means Underwriters' Laboratories of Canada, No. ULC S603.1-M1982, Standard for Galvanic Corrosion Protection Systems for Steel Underground Tanks for Flammable and Combustible Liquids, 1992, Underwriters Laboratories of Canada, 7 Underwriters Road, Scarborough, Ontario, Canada M1R5P8.(ah) 40 CFR 280 means part 280 of title 40 of the Code of Federal Regulations, Technical Standards and Corrective Action Requirements for Owners and Operators of Underground Storage Tanks (UST), July 15, 2015, Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. (ai) 40 CFR 281 means part 281 of title 40 of the Code of Federal Regulations, Approval of State Underground Storage Tank Programs, July 15, 2015, Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.(aj)40 CFR 302.8 means section 8, part 302 of title 40 of the Code of Federal Regulations, Continuous Releases, July 1, 1990, Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.N.Y. Comp. Codes R. & Regs. Tit. 6 §§ 598-1.16
Adopted New York State Register July 19, 2023/Volume XLV, Issue 29, eff. 10/17/2023