N.Y. Comp. Codes R. & Regs. tit. 12 § 47.9
Current through Register Vol. 46, No. 50, December 11, 2024
The marking design shall be at least four inches in diameter if circular or four inches in its least dimension if elliptical or polygonal, or shall be at least 12 inches in horizontal dimension if the marking is less than four inches in its least dimension. In no event shall the vertical dimension of any marking including lettering be less than one and one-half inches in height.
N.Y. Comp. Codes R. & Regs. Tit. 12 § 47.9