N.Y. Comp. Codes R. & Regs. tit. 1 § 195.4

Current through Register Vol. 46, No. 50, December 11, 2024
Section 195.4 - Application of tolerances

The tolerances specified for the various grades are placed on a container basis. The averages for an entire lot, based on sample inspection, must be within the tolerances specified. The contents of individual containers in any lot however may vary from the specified tolerances subject to the following limitations: Not over one-fourth of the individual packages in any lot may contain more than one and one-half times the tolerances specified except that any container shall not have more mold or decay than the amount specified in the tolerance.

N.Y. Comp. Codes R. & Regs. Tit. 1 § 195.4